The following error can be seen during boot:
of: /cpus/cpu@501: Couldn't find opp node
Change cpu nodes to use operating-points-v2 in order to fix this.
Fixes: ce76de984649 ("ARM: dts: rockchip: convert rk3288 to operating-points-v2")
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
arch/arm/boot/dts/rk3288.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index ca7d52daa8fb..09868dcee34b 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -70,7 +70,7 @@
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
@@ -80,7 +80,7 @@
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
@@ -90,7 +90,7 @@
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
--
2.17.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
