---
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/atmel/atmel-isi.c | 4 ++--
drivers/media/platform/coda/coda-jpeg.c | 2 +-
drivers/media/platform/davinci/isif.c | 4 ++--
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/davinci/vpif.c | 2 +-
drivers/media/platform/davinci/vpif_display.c | 4 ++--
.../media/platform/exynos4-is/fimc-is-command.h | 2 +-
drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +-
drivers/media/platform/exynos4-is/media-dev.h | 2 +-
drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++--
drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++--
drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++---
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +-
drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++--
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +-
.../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++--
.../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +-
drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +-
drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +-
drivers/media/platform/omap/omap_vout.c | 4 ++--
drivers/media/platform/omap/omap_voutdef.h | 4 ++--
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/platform/omap3isp/ispccdc.c | 4 ++--
drivers/media/platform/omap3isp/ispcsi2.c | 2 +-
drivers/media/platform/pxa_camera.c | 2 +-
drivers/media/platform/qcom/venus/core.h | 2 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 2 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++--
drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++---
drivers/media/platform/s3c-camif/camif-core.h | 2 +-
drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++--
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++--
.../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +-
drivers/media/platform/sti/delta/delta.h | 2 +-
drivers/media/platform/sti/hva/hva-h264.c | 2 +-
drivers/media/platform/stm32/stm32-dcmi.c | 2 +-
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +-
drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++-------
drivers/media/platform/ti-vpe/vpe.c | 2 +-
drivers/media/platform/vsp1/vsp1_brx.c | 4 ++--
drivers/media/platform/xilinx/xilinx-vip.c | 2 +-
46 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/drivers/media/platform/Kconfig
b/drivers/media/platform/Kconfig
index 6cff26b29a38..4acbed189644 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS
if SDR_PLATFORM_DRIVERS
config VIDEO_RCAR_DRIF
- tristate "Renesas Digitial Radio Interface (DRIF)"
+ tristate "Renesas Digital Radio Interface (DRIF)"
depends on VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_VMALLOC
diff --git a/drivers/media/platform/atmel/atmel-isi.c
b/drivers/media/platform/atmel/atmel-isi.c
index fdb255e4a956..08b8d5583080 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -110,7 +110,7 @@ struct atmel_isi {
bool enable_preview_path;
struct completion complete;
- /* ISI peripherial clock */
+ /* ISI peripheral clock */
struct clk *pclk;
unsigned int irq;
@@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct
v4l2_async_notifier *notifier,
dev_dbg(isi->dev, "Removing %s\n",
video_device_node_name(isi->vdev));
- /* Checks internaly if vdev have been init or not */
+ /* Checks internally if vdev have been init or not */
video_unregister_device(isi->vdev);
}
diff --git a/drivers/media/platform/coda/coda-jpeg.c
b/drivers/media/platform/coda/coda-jpeg.c
index 9f899a6cefed..39a2351c1e48 100644
--- a/drivers/media/platform/coda/coda-jpeg.c
+++ b/drivers/media/platform/coda/coda-jpeg.c
@@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 +
2] = {
/*
* Quantization tables for luminance and chrominance components in
- * zig-zag scan order from the Freescale i.MX VPU libaries
+ * zig-zag scan order from the Freescale i.MX VPU libraries
*/
static unsigned char luma_q[64] = {
diff --git a/drivers/media/platform/davinci/isif.c
b/drivers/media/platform/davinci/isif.c
index 340f8218f54d..47cecd10eb9f 100644
--- a/drivers/media/platform/davinci/isif.c
+++ b/drivers/media/platform/davinci/isif.c
@@ -328,7 +328,7 @@ static void isif_config_bclamp(struct
isif_black_clamp *bc)
if (bc->en) {
val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
- /* Enable BC and horizontal clamp caculation paramaters */
+ /* Enable BC and horizontal clamp calculation parameters */
val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
regw(val, CLAMPCFG);
@@ -358,7 +358,7 @@ static void isif_config_bclamp(struct
isif_black_clamp *bc)
regw(bc->horz.win_start_v_calc, CLHWIN2);
}
- /* vertical clamp caculation paramaters */
+ /* vertical clamp calculation parameters */
/* Reset clamp value sel for previous line */
val |=
diff --git a/drivers/media/platform/davinci/vpbe.c
b/drivers/media/platform/davinci/vpbe.c
index 4766a7a23d16..8339163a5231 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device
*vpbe_dev, int index)
goto unlock;
/*
- * It is assumed that venc or extenal encoder will set a default
+ * It is assumed that venc or external encoder will set a default
* mode in the sub device. For external encoder or LCD pannel
output,
* we also need to set up the lcd port for the required mode. So
setup
* the lcd port for the default mode that is configured in the
board
diff --git a/drivers/media/platform/davinci/vpif.c
b/drivers/media/platform/davinci/vpif.c
index 16352e2263d2..df66461f5d4f 100644
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -1,7 +1,7 @@
/*
* vpif - Video Port Interface driver
* VPIF is a receiver and transmitter for video data. It has two
channels(0, 1)
- * that receiveing video byte stream and two channels(2, 3) for video
output.
+ * that receiving video byte stream and two channels(2, 3) for video
output.
* The hardware supports SDTV, HDTV formats, raw data capture.
* Currently, the driver supports NTSC and PAL standards.
*
diff --git a/drivers/media/platform/davinci/vpif_display.c
b/drivers/media/platform/davinci/vpif_display.c
index 3517487d9760..f4b4f2a1dfc0 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct
vb2_queue *vq,
* vpif_buffer_queue : Callback function to add buffer to DMA queue
* @vb: ptr to vb2_buffer
*
- * This callback fucntion queues the buffer to DMA engine
+ * This callback function queues the buffer to DMA engine
*/
static void vpif_buffer_queue(struct vb2_buffer *vb)
{
@@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file,
void *priv,
struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
/*
- * to supress v4l-compliance warnings silently correct
+ * to suppress v4l-compliance warnings silently correct
* the pixelformat
*/
if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h
b/drivers/media/platform/exynos4-is/fimc-is-command.h
index 0d1f52e394b1..b06b56b890d5 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-command.h
+++ b/drivers/media/platform/exynos4-is/fimc-is-command.h
@@ -18,7 +18,7 @@
#define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version
1.10 */
-/* Enumeration of commands beetween the FIMC-IS and the host
processor. */
+/* Enumeration of commands between the FIMC-IS and the host
processor. */
/* HOST to FIMC-IS */
#define HIC_PREVIEW_STILL 0x0001
diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h
b/drivers/media/platform/exynos4-is/fimc-is-param.h
index 8e31f7642776..22923a3d405e 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-param.h
+++ b/drivers/media/platform/exynos4-is/fimc-is-param.h
@@ -298,7 +298,7 @@ enum isp_af_mode {
#define ISP_FLASH_COMMAND_AUTO 2
#define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */
-/* Flash red-eye commads */
+/* Flash red-eye commands */
#define ISP_FLASH_REDEYE_DISABLE 0
#define ISP_FLASH_REDEYE_ENABLE 1
diff --git a/drivers/media/platform/exynos4-is/media-dev.h
b/drivers/media/platform/exynos4-is/media-dev.h
index 9f527670395a..a7c9490bbcb4 100644
--- a/drivers/media/platform/exynos4-is/media-dev.h
+++ b/drivers/media/platform/exynos4-is/media-dev.h
@@ -79,7 +79,7 @@ struct fimc_camclk_info {
/**
* struct fimc_sensor_info - image data source subdev information
- * @pdata: sensor's atrributes passed as media device's platform data
+ * @pdata: sensor's attributes passed as media device's platform data
* @asd: asynchronous subdev registration data structure
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c
b/drivers/media/platform/exynos4-is/mipi-csis.c
index 35cb0162085b..234e047e3e8f 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -183,7 +183,7 @@ struct csis_drvdata {
* @index: the hardware instance index
* @pdev: CSIS platform device
* @phy: pointer to the CSIS generic PHY
- * @regs: mmaped I/O registers memory
+ * @regs: mmapped I/O registers memory
* @supplies: CSIS regulator supplies
* @clock: CSIS clocks
* @irq: requested s5p-mipi-csis irq number
@@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device
*pdev,
goto err;
}
- /* Get MIPI CSI-2 bus configration from the endpoint node. */
+ /* Get MIPI CSI-2 bus configuration from the endpoint node. */
of_property_read_u32(node, "samsung,csis-hs-settle",
&state->hs_settle);
state->wclk_ext = of_property_read_bool(node,
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 70a2833db0d1..af76eb637773 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera
*mcam)
* bit 8 ~ bit 15: HS_SETTLE
* Time interval during which the HS
* receiver shall ignore any Data Lane
- * HS transistions.
- * The vaule has been calibrated on
+ * HS transitions.
+ * The value has been calibrated on
* different boards. It seems to work well.
*
* More detail please refer
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
index ad1cff306efd..e5abb1abb3a3 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
@@ -41,7 +41,7 @@
#define MTK_MDP_CTX_ERROR BIT(5)
/**
- * struct mtk_mdp_pix_align - alignement of image
+ * struct mtk_mdp_pix_align - alignment of image
* @org_w: source alignment of width
* @org_h: source alignment of height
* @target_w: dst alignment of width
@@ -122,8 +122,8 @@ struct mtk_mdp_frame {
/**
* struct mtk_mdp_variant - image processor variant information
* @pix_max: maximum limit of image size
- * @pix_min: minimun limit of image size
- * @pix_align: alignement of image
+ * @pix_min: minimum limit of image size
+ * @pix_align: alignment of image
* @h_scale_up_max: maximum scale-up in horizontal
* @v_scale_up_max: maximum scale-up in vertical
* @h_scale_down_max: maximum scale-down in horizontal
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
index ba619647bc10..794aba685120 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
@@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct
vb2_buffer *vb)
ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
if (ret || !res_chg) {
/*
- * fb == NULL menas to parse SPS/PPS header or
+ * fb == NULL means to parse SPS/PPS header or
* resolution info in src_mem. Decode can fail
* if there is no SPS header or picture info
* in bs
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 8aba69555b12..e7e2a108def9 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -151,9 +151,9 @@ struct mtk_q_data {
* @intra_period: I frame period
* @gop_size: group of picture size, it's used as the intra frame
period
* @framerate_num: frame rate numerator. ex: framerate_num=30 and
- * framerate_denom=1 menas FPS is 30
+ * framerate_denom=1 means FPS is 30
* @framerate_denom: frame rate denominator. ex: framerate_num=30 and
- * framerate_denom=1 menas FPS is 30
+ * framerate_denom=1 means FPS is 30
* @h264_max_qp: Max value for H.264 quantization parameter
* @h264_profile: V4L2 defined H.264 profile
* @h264_level: V4L2 defined H.264 level
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index d1f12257bf66..2af654240d96 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct
mtk_vcodec_ctx *ctx,
param->input_yuv_fmt = VENC_YUV_FORMAT_NV21;
break;
default:
- mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc);
+ mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc);
break;
}
param->h264_profile = enc_params->h264_profile;
diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
index aa3ce41898bc..02c960c63ac0 100644
--- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
@@ -55,7 +55,7 @@ struct h264_fb {
/**
* struct h264_ring_fb_list - ring frame buffer list
- * @fb_list : frame buffer arrary
+ * @fb_list : frame buffer array
* @read_idx : read index
* @write_idx : write index
* @count : buffer count in list
@@ -72,7 +72,7 @@ struct h264_ring_fb_list {
/**
* struct vdec_h264_dec_info - decode information
* @dpb_sz : decoding picture buffer size
- * @resolution_changed : resoltion change happen
+ * @resolution_changed : resolution change happen
* @realloc_mv_buf : flag to notify driver to re-allocate mv buffer
* @reserved : for 8 bytes alignment
* @bs_dma : Input bit-stream buffer dma address
diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
index 3e84a761db3a..bac3723038de 100644
--- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
@@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base {
/**
* struct vdec_vp8_vpu_inst - VPU instance for VP8 decode
* @wq_hd : Wait queue to wait VPU message ack
- * @signaled : 1 - Host has received ack message from VPU, 0 - not
recevie
+ * @signaled : 1 - Host has received ack message from VPU, 0 - not
receive
* @failure : VPU execution result status 0 - success, others - fail
* @inst_addr : VPU decoder instance address
*/
diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
index ded1154481cd..9a21591f3818 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
@@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx);
* vdec_if_decode() - trigger decode
* @ctx : [in] v4l2 context
* @bs : [in] input bitstream
- * @fb : [in] frame buffer to store decoded frame, when null menas
parse
+ * @fb : [in] frame buffer to store decoded frame, when null means
parse
* header only
* @res_chg : [out] resolution change happens if current bs have
different
* picture width/height
diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
index cd37bb2a610f..79d8eac7f5e2 100644
--- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
+++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
@@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu,
uint32_t *data, unsigned int len);
/**
* vpu_dec_end - end decoding, basically the function will be
invoked once
* when HW decoding done interrupt received
successfully. The
- * decoder in VPU will continute to do referene frame
management
+ * decoder in VPU will continue to do reference frame
management
* and check if there is a new decoded frame available
to display.
*
* @vpu : instance for vdec_vpu_inst
diff --git a/drivers/media/platform/omap/omap_vout.c
b/drivers/media/platform/omap/omap_vout.c
index ff3de2dce5a2..37f0d7146dfa 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file
*file, void *fh,
}
timing = &dssdev->panel.timings;
- /* We dont support RGB24-packed mode if vrfb rotation
+ /* We don't support RGB24-packed mode if vrfb rotation
* is enabled*/
if ((is_rotation_enabled(vout)) &&
f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
@@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file
*file, void *fh,
vout->fbuf.fmt.width = timing->x_res;
}
- /* change to samller size is OK */
+ /* change to smaller size is OK */
bpp = omap_vout_try_format(&f->fmt.pix);
f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
diff --git a/drivers/media/platform/omap/omap_voutdef.h
b/drivers/media/platform/omap/omap_voutdef.h
index 56b630b1c8b4..c740393c8509 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -37,7 +37,7 @@
#define VID_MAX_WIDTH 1280 /* Largest width */
#define VID_MAX_HEIGHT 720 /* Largest height */
-/* Mimimum requirement is 2x2 for DSS */
+/* Minimum requirement is 2x2 for DSS */
#define VID_MIN_WIDTH 2
#define VID_MIN_HEIGHT 2
@@ -135,7 +135,7 @@ struct omap_vout_device {
enum omap_color_mode dss_mode;
/* we don't allow to request new buffer when old buffers are
- * still mmaped
+ * still mmapped
*/
int mmap_count;
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index 13f2828d880d..bd57174d81a7 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp)
*
* To solve this problem power management support is split into
prepare/complete
* and suspend/resume operations. The pipelines are stopped in
prepare() and the
- * ISP clocks get disabled in suspend(). Similarly, the clocks are
reenabled in
+ * ISP clocks get disabled in suspend(). Similarly, the clocks are
re-enabled in
* resume(), and the the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not
modelled explicitly
diff --git a/drivers/media/platform/omap3isp/ispccdc.c
b/drivers/media/platform/omap3isp/ispccdc.c
index 14a1c24037c4..261ad1175f98 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct
isp_ccdc_device *ccdc)
return 0;
/* We're in continuous mode, and memory writes were disabled due
to a
- * buffer underrun. Reenable them now that we have a buffer. The
buffer
+ * buffer underrun. Re-enable them now that we have a buffer. The
buffer
* address has been set in ccdc_video_queue.
*/
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
ccdc->underrun) {
@@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device
*ccdc)
* data to memory the CCDC and LSC are stopped immediately but
* without change the CCDC stopping state machine. The CCDC
* stopping state machine should be used only when user request
- * for stopping is received (SINGLESHOT is an exeption).
+ * for stopping is received (SINGLESHOT is an exception).
*/
switch (ccdc->state) {
case ISP_PIPELINE_STREAM_SINGLESHOT:
diff --git a/drivers/media/platform/omap3isp/ispcsi2.c
b/drivers/media/platform/omap3isp/ispcsi2.c
index 9c180f607bcb..da66ea65be5d 100644
--- a/drivers/media/platform/omap3isp/ispcsi2.c
+++ b/drivers/media/platform/omap3isp/ispcsi2.c
@@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device
*csi2,
/* Skip interrupts until we reach the frame skip count. The CSI2
will be
* automatically disabled, as the frame skip count has been
programmed
- * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
+ * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it.
*
* It would have been nice to rely on the FRAME_NUMBER interrupt
instead
* but it turned out that the interrupt is only generated when
the CSI2
diff --git a/drivers/media/platform/pxa_camera.c
b/drivers/media/platform/pxa_camera.c
index 3cf3c6390cc8..4fe228752a43 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct
pxa_camera_dev *pcdev)
pcdev->channels = 1;
- /* Make choises, based on platform preferences */
+ /* Make choices, based on platform preferences */
if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
(common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (pcdev->platform_flags & PXA_CAMERA_HSP)
diff --git a/drivers/media/platform/qcom/venus/core.h
b/drivers/media/platform/qcom/venus/core.h
index 79c7e816c706..7a3feb5cee00 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -219,7 +219,7 @@ struct venus_buffer {
#define to_venus_buffer(ptr) container_of(ptr, struct
venus_buffer, vb)
/**
- * struct venus_inst - holds per instance paramerters
+ * struct venus_inst - holds per instance parameters
*
* @list: used for attach an instance to the core
* @lock: instance lock
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
b/drivers/media/platform/rcar-vin/rcar-dma.c
index beb9248992a4..2207a31d355e 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin)
break;
}
- /* Enable VSYNC Field Toogle mode after one VSYNC input */
+ /* Enable VSYNC Field Toggle mode after one VSYNC input */
if (vin->info->model == RCAR_GEN3)
dmr2 = VNDMR2_FTEV;
else
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 7a2851790b91..7cbdcbf9b090 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin,
* The V4L2 specification clearly documents the colorspace fields
* as being set by drivers for capture devices. Using the values
* supplied by userspace thus wouldn't comply with the API. Until
- * the API is updated force fixed vaules.
+ * the API is updated force fixed values.
*/
pix->colorspace = RVIN_DEFAULT_COLORSPACE;
pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
@@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin)
v4l2_info(&vin->v4l2_dev, "Removing %s\n",
video_device_node_name(&vin->vdev));
- /* Checks internaly if vdev have been init or not */
+ /* Checks internally if vdev have been init or not */
video_unregister_device(&vin->vdev);
}
diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c
b/drivers/media/platform/rockchip/rga/rga-hw.c
index 96d1b1b3fe8e..843e50d17a72 100644
--- a/drivers/media/platform/rockchip/rga/rga-hw.c
+++ b/drivers/media/platform/rockchip/rga/rga-hw.c
@@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx
*ctx)
}
/*
- * Cacluate the up/down scaling mode/factor.
+ * Calculate the up/down scaling mode/factor.
*
* RGA used to scale the picture first, and then rotate second,
* so we need to swap the w/h when rotate degree is 90/270.
@@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx
*ctx)
}
/*
- * Cacluate the framebuffer virtual strides and active size,
+ * Calculate the framebuffer virtual strides and active size,
* note that the step of vir_stride / vir_width is 4 byte words
*/
src_vir_info.data.vir_stride = ctx->in.stride >> 2;
@@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx
*ctx)
dst_act_info.data.act_width = dst_w - 1;
/*
- * Cacluate the source framebuffer base address with offset pixel.
+ * Calculate the source framebuffer base address with offset pixel.
*/
src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y,
src_w, src_h);
diff --git a/drivers/media/platform/s3c-camif/camif-core.h
b/drivers/media/platform/s3c-camif/camif-core.h
index 1f5c8c94ce89..be5e7357dffc 100644
--- a/drivers/media/platform/s3c-camif/camif-core.h
+++ b/drivers/media/platform/s3c-camif/camif-core.h
@@ -260,7 +260,7 @@ struct camif_vp {
* @clock: clocks required for the CAMIF operation
* @lock: mutex protecting this data structure
* @slock: spinlock protecting CAMIF registers
- * @io_base: start address of the mmaped CAMIF registers
+ * @io_base: start address of the mmapped CAMIF registers
*/
struct camif_dev {
struct media_device media_dev;
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h
b/drivers/media/platform/s5p-jpeg/jpeg-core.h
index 90fda4b720eb..144c102ff05f 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.h
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h
@@ -153,7 +153,7 @@ struct s5p_jpeg_variant {
/**
* struct jpeg_fmt - driver's internal color format data
- * @name: format descritpion
+ * @name: format description
* @fourcc: the fourcc code, 0 if not applicable
* @depth: number of bits per pixel
* @colplanes: number of color planes (1 for packed formats)
@@ -193,7 +193,7 @@ struct s5p_jpeg_marker {
* @sos: SOS marker's position relative to the buffer beginning
* @dht: DHT markers' positions relative to the buffer beginning
* @dqt: DQT markers' positions relative to the buffer beginning
- * @sof: SOF0 marker's postition relative to the buffer beginning
+ * @sof: SOF0 marker's position relative to the buffer beginning
* @sof_len: SOF0 marker's payload length (without length field
itself)
* @components: number of image components
* @size: image buffer size in bytes
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 20442a9b9f7a..24148020baa9 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf {
* @enc_ctrl_handler: control framework handler for encoding
* @pm: power management control
* @variant: MFC hardware variant information
- * @num_inst: couter of active MFC instances
+ * @num_inst: counter of active MFC instances
* @irqlock: lock for operations on videobuf2 queues
* @condlock: lock for changing/checking if a context is
ready to be
* processed
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index ee7b15b335e0..9f832ba7bc8c 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
struct firmware *fw_blob;
int i, err = -EINVAL;
- /* Firmare has to be present as a separate file or compiled
+ /* Firmware has to be present as a separate file or compiled
* into kernel. */
mfc_debug_enter();
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index f4c0e3a8f27d..e111f9c47179 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void
*priv,
int i;
if (buf->memory != V4L2_MEMORY_MMAP) {
- mfc_err("Only mmaped buffers can be used\n");
+ mfc_err("Only mmapped buffers can be used\n");
return -EINVAL;
}
mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
index 0913881219ff..6144e95f6425 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
@@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct
s5p_mfc_ctx *ctx)
* First set the output frame buffers
*/
if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
- mfc_err("It seems that not all destination buffers were
mmaped\nMFC requires that all destination are mmaped before starting
processing\n");
+ mfc_err("It seems that not all destination buffers were
mmapped\nMFC requires that all destination are mmapped before starting
processing\n");
return -EAGAIN;
}
if (list_empty(&ctx->src_queue)) {
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
index 7c629be43205..281699ab7fe1 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
@@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct
s5p_mfc_ctx *ctx)
return 0;
}
-/* Release temproary buffers for decoding */
+/* Release temporary buffers for decoding */
static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx)
{
/* NOP */
@@ -1928,7 +1928,7 @@ static inline int
s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
mfc_err("It seems that not all destination buffers were\n"
- "mmaped.MFC requires that all destination are mmaped\n"
+ "mmapped.MFC requires that all destination are mmapped\n"
"before starting processing.\n");
return -EAGAIN;
}
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
index 3dbb3a287cc0..c9d6021904cd 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
@@ -193,7 +193,7 @@ struct c8sectpfei {
#define C8SECTPFE_SYS_ENABLE BIT(0)
/*
- * Ponter record data structure required for each input block
+ * Pointer record data structure required for each input block
* see Table 82 on page 167 of functional specification.
*/
diff --git a/drivers/media/platform/sti/delta/delta.h
b/drivers/media/platform/sti/delta/delta.h
index 2ba99922c05b..914556030e70 100644
--- a/drivers/media/platform/sti/delta/delta.h
+++ b/drivers/media/platform/sti/delta/delta.h
@@ -286,7 +286,7 @@ struct delta_dec {
* Header parsing must be done using decode(), giving
* explicitly header access unit or first access unit of bitstream.
* If no valid header is found, get_streaminfo will return
-ENODATA,
- * in this case the next bistream access unit must be decoded till
+ * in this case the next bitstream access unit must be decoded till
* get_streaminfo becomes successful.
*/
int (*get_streaminfo)(struct delta_ctx *ctx,
diff --git a/drivers/media/platform/sti/hva/hva-h264.c
b/drivers/media/platform/sti/hva/hva-h264.c
index b61a5d337d2a..c34f7cf5aed2 100644
--- a/drivers/media/platform/sti/hva/hva-h264.c
+++ b/drivers/media/platform/sti/hva/hva-h264.c
@@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx
*pctx,
td->frame_width = frame_width;
td->frame_height = frame_height;
- /* set frame alignement */
+ /* set frame alignment */
td->window_width = frame_width;
td->window_height = frame_height;
td->window_horizontal_offset = 0;
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c
b/drivers/media/platform/stm32/stm32-dcmi.c
index 6732874114cf..5fe5b38fa901 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct
v4l2_async_notifier *notifier,
dev_dbg(dcmi->dev, "Removing %s\n",
video_device_node_name(dcmi->vdev));
- /* Checks internaly if vdev has been init or not */
+ /* Checks internally if vdev has been init or not */
video_unregister_device(dcmi->vdev);
}
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
index 0bb000712c33..85f97d4f086e 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
@@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi
*csi, u32 pixformat,
int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable);
/**
- * sun6i_csi_update_config() - update the csi register setttings
+ * sun6i_csi_update_config() - update the csi register settings
* @csi: pointer to the csi
* @config: see struct sun6i_csi_config
*/
diff --git a/drivers/media/platform/ti-vpe/vpdma.c
b/drivers/media/platform/ti-vpe/vpdma.c
index e2cf2b90e500..1da2cb3aaf0c 100644
--- a/drivers/media/platform/ti-vpe/vpdma.c
+++ b/drivers/media/platform/ti-vpe/vpdma.c
@@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf);
/*
* unmap descriptor/payload DMA buffer, disabling DMA access and
- * allowing the main processor to acces the data
+ * allowing the main processor to access the data
*/
void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf
*buf)
{
@@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list
*list)
EXPORT_SYMBOL(vpdma_reset_desc_list);
/*
- * free the buffer allocated fot the VPDMA descriptor list, this
should be
+ * free the buffer allocated for the VPDMA descriptor list, this
should be
* called when the user doesn't want to use VPDMA any more.
*/
void vpdma_free_desc_list(struct vpdma_desc_list *list)
@@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
* append an outbound data transfer descriptor to the given
descriptor list,
* this sets up a 'client to memory' VPDMA transfer for the given
VPDMA channel
*
- * @list: vpdma desc list to which we add this decriptor
+ * @list: vpdma desc list to which we add this descriptor
* @width: width of the image in pixels in memory
* @c_rect: compose params of output image
* @fmt: vpdma data format of the buffer
@@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
* max_width: enum for maximum width of data transfer
* max_height: enum for maximum height of data transfer
* chan: VPDMA channel
- * flags: VPDMA flags to configure some descriptor fileds
+ * flags: VPDMA flags to configure some descriptor fields
*/
void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width,
int stride, const struct v4l2_rect *c_rect,
@@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd);
* append an inbound data transfer descriptor to the given
descriptor list,
* this sets up a 'memory to client' VPDMA transfer for the given
VPDMA channel
*
- * @list: vpdma desc list to which we add this decriptor
+ * @list: vpdma desc list to which we add this descriptor
* @width: width of the image in pixels in memory(not the cropped
width)
* @c_rect: crop params of input image
* @fmt: vpdma data format of the buffer
* dma_addr: dma address as seen by VPDMA
* chan: VPDMA channel
* field: top or bottom field info of the input image
- * flags: VPDMA flags to configure some descriptor fileds
+ * flags: VPDMA flags to configure some descriptor fields
* frame_width/height: the complete width/height of the image
presented to the
* client (this makes sense when multiple channels are
* connected to the same client, forming a larger frame)
@@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct
vpdma_data *vpdma, int irq_num)
}
EXPORT_SYMBOL(vpdma_get_list_mask);
-/* clear previosuly occured list intterupts in the LIST_STAT register */
+/* clear previously occurred list interupts in the LIST_STAT register */
void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
int list_num)
{
diff --git a/drivers/media/platform/ti-vpe/vpe.c
b/drivers/media/platform/ti-vpe/vpe.c
index d70871d0ad2d..207e7e76c048 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
/*
* we make sure that the source image has a 16 byte aligned
* stride, we need to do the same for the motion vector buffer
- * by aligning it's stride to the next 16 byte boundry. this
+ * by aligning it's stride to the next 16 byte boundary. this
* extra space will not be used by the de-interlacer, but will
* ensure that vpdma operates correctly
*/
diff --git a/drivers/media/platform/vsp1/vsp1_brx.c
b/drivers/media/platform/vsp1/vsp1_brx.c
index 5e50178b057d..58ad248cd7f7 100644
--- a/drivers/media/platform/vsp1/vsp1_brx.c
+++ b/drivers/media/platform/vsp1/vsp1_brx.c
@@ -296,7 +296,7 @@ static void brx_configure_stream(struct
vsp1_entity *entity,
/*
* The hardware is extremely flexible but we have no userspace
API to
* expose all the parameters, nor is it clear whether we would
have use
- * cases for all the supported modes. Let's just harcode the
parameters
+ * cases for all the supported modes. Let's just hardcode the
parameters
* to sane default values for now.
*/
@@ -373,7 +373,7 @@ static void brx_configure_stream(struct
vsp1_entity *entity,
vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
/*
- * Harcode the blending formula to
+ * Hardcode the blending formula to
*
* DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
* DSTa = DSTa * (1 - SRCa) + SRCa
diff --git a/drivers/media/platform/xilinx/xilinx-vip.c
b/drivers/media/platform/xilinx/xilinx-vip.c
index 18f98838111b..08a825c3a3f6 100644
--- a/drivers/media/platform/xilinx/xilinx-vip.c
+++ b/drivers/media/platform/xilinx/xilinx-vip.c
@@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size);
* the register, otherwise the bitmask is cleared from the register
* when the flag @set is false.
*
- * Fox eample, this function can be used to set a control with a
boolean value
+ * Fox example, this function can be used to set a control with a
boolean value
* requested by users. If the caller knows whether to set or clear
in the first
* place, the caller should call xvip_clr() or xvip_set() directly
instead of
* using this function.
