Hi Mauro,
Thanks for your patch,
On 2019-02-18 14:29:00 -0500, Mauro Carvalho Chehab wrote:
> Use codespell to fix lots of typos over frontends.
>
> Manually verified to avoid false-positives.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
For drivers/media/platform/rcar-vin/*
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> drivers/media/platform/Kconfig | 2 +-
> drivers/media/platform/atmel/atmel-isi.c | 4 ++--
> drivers/media/platform/coda/coda-jpeg.c | 2 +-
> drivers/media/platform/davinci/isif.c | 4 ++--
> drivers/media/platform/davinci/vpbe.c | 2 +-
> drivers/media/platform/davinci/vpif.c | 2 +-
> drivers/media/platform/davinci/vpif_display.c | 4 ++--
> .../media/platform/exynos4-is/fimc-is-command.h | 2 +-
> drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +-
> drivers/media/platform/exynos4-is/media-dev.h | 2 +-
> drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++--
> drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++--
> drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++---
> drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +-
> drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++--
> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +-
> .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++--
> .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +-
> drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +-
> drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +-
> drivers/media/platform/omap/omap_vout.c | 4 ++--
> drivers/media/platform/omap/omap_voutdef.h | 4 ++--
> drivers/media/platform/omap3isp/isp.c | 2 +-
> drivers/media/platform/omap3isp/ispccdc.c | 4 ++--
> drivers/media/platform/omap3isp/ispcsi2.c | 2 +-
> drivers/media/platform/pxa_camera.c | 2 +-
> drivers/media/platform/qcom/venus/core.h | 2 +-
> drivers/media/platform/rcar-vin/rcar-dma.c | 2 +-
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++--
> drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++---
> drivers/media/platform/s3c-camif/camif-core.h | 2 +-
> drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++--
> drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++--
> .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +-
> drivers/media/platform/sti/delta/delta.h | 2 +-
> drivers/media/platform/sti/hva/hva-h264.c | 2 +-
> drivers/media/platform/stm32/stm32-dcmi.c | 2 +-
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +-
> drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++-------
> drivers/media/platform/ti-vpe/vpe.c | 2 +-
> drivers/media/platform/vsp1/vsp1_brx.c | 4 ++--
> drivers/media/platform/xilinx/xilinx-vip.c | 2 +-
> 46 files changed, 70 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 6cff26b29a38..4acbed189644 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS
> if SDR_PLATFORM_DRIVERS
>
> config VIDEO_RCAR_DRIF
> - tristate "Renesas Digitial Radio Interface (DRIF)"
> + tristate "Renesas Digital Radio Interface (DRIF)"
> depends on VIDEO_V4L2
> depends on ARCH_RENESAS || COMPILE_TEST
> select VIDEOBUF2_VMALLOC
> diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
> index fdb255e4a956..08b8d5583080 100644
> --- a/drivers/media/platform/atmel/atmel-isi.c
> +++ b/drivers/media/platform/atmel/atmel-isi.c
> @@ -110,7 +110,7 @@ struct atmel_isi {
> bool enable_preview_path;
>
> struct completion complete;
> - /* ISI peripherial clock */
> + /* ISI peripheral clock */
> struct clk *pclk;
> unsigned int irq;
>
> @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier,
>
> dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev));
>
> - /* Checks internaly if vdev have been init or not */
> + /* Checks internally if vdev have been init or not */
> video_unregister_device(isi->vdev);
> }
>
> diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
> index 9f899a6cefed..39a2351c1e48 100644
> --- a/drivers/media/platform/coda/coda-jpeg.c
> +++ b/drivers/media/platform/coda/coda-jpeg.c
> @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = {
>
> /*
> * Quantization tables for luminance and chrominance components in
> - * zig-zag scan order from the Freescale i.MX VPU libaries
> + * zig-zag scan order from the Freescale i.MX VPU libraries
> */
>
> static unsigned char luma_q[64] = {
> diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
> index 340f8218f54d..47cecd10eb9f 100644
> --- a/drivers/media/platform/davinci/isif.c
> +++ b/drivers/media/platform/davinci/isif.c
> @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc)
> if (bc->en) {
> val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
>
> - /* Enable BC and horizontal clamp caculation paramaters */
> + /* Enable BC and horizontal clamp calculation parameters */
> val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
>
> regw(val, CLAMPCFG);
> @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc)
> regw(bc->horz.win_start_v_calc, CLHWIN2);
> }
>
> - /* vertical clamp caculation paramaters */
> + /* vertical clamp calculation parameters */
>
> /* Reset clamp value sel for previous line */
> val |=
> diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
> index 4766a7a23d16..8339163a5231 100644
> --- a/drivers/media/platform/davinci/vpbe.c
> +++ b/drivers/media/platform/davinci/vpbe.c
> @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
> goto unlock;
>
> /*
> - * It is assumed that venc or extenal encoder will set a default
> + * It is assumed that venc or external encoder will set a default
> * mode in the sub device. For external encoder or LCD pannel output,
> * we also need to set up the lcd port for the required mode. So setup
> * the lcd port for the default mode that is configured in the board
> diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
> index 16352e2263d2..df66461f5d4f 100644
> --- a/drivers/media/platform/davinci/vpif.c
> +++ b/drivers/media/platform/davinci/vpif.c
> @@ -1,7 +1,7 @@
> /*
> * vpif - Video Port Interface driver
> * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
> - * that receiveing video byte stream and two channels(2, 3) for video output.
> + * that receiving video byte stream and two channels(2, 3) for video output.
> * The hardware supports SDTV, HDTV formats, raw data capture.
> * Currently, the driver supports NTSC and PAL standards.
> *
> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> index 3517487d9760..f4b4f2a1dfc0 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq,
> * vpif_buffer_queue : Callback function to add buffer to DMA queue
> * @vb: ptr to vb2_buffer
> *
> - * This callback fucntion queues the buffer to DMA engine
> + * This callback function queues the buffer to DMA engine
> */
> static void vpif_buffer_queue(struct vb2_buffer *vb)
> {
> @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv,
> struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
>
> /*
> - * to supress v4l-compliance warnings silently correct
> + * to suppress v4l-compliance warnings silently correct
> * the pixelformat
> */
> if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
> diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h
> index 0d1f52e394b1..b06b56b890d5 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is-command.h
> +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h
> @@ -18,7 +18,7 @@
>
> #define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */
>
> -/* Enumeration of commands beetween the FIMC-IS and the host processor. */
> +/* Enumeration of commands between the FIMC-IS and the host processor. */
>
> /* HOST to FIMC-IS */
> #define HIC_PREVIEW_STILL 0x0001
> diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h
> index 8e31f7642776..22923a3d405e 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is-param.h
> +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h
> @@ -298,7 +298,7 @@ enum isp_af_mode {
> #define ISP_FLASH_COMMAND_AUTO 2
> #define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */
>
> -/* Flash red-eye commads */
> +/* Flash red-eye commands */
> #define ISP_FLASH_REDEYE_DISABLE 0
> #define ISP_FLASH_REDEYE_ENABLE 1
>
> diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
> index 9f527670395a..a7c9490bbcb4 100644
> --- a/drivers/media/platform/exynos4-is/media-dev.h
> +++ b/drivers/media/platform/exynos4-is/media-dev.h
> @@ -79,7 +79,7 @@ struct fimc_camclk_info {
>
> /**
> * struct fimc_sensor_info - image data source subdev information
> - * @pdata: sensor's atrributes passed as media device's platform data
> + * @pdata: sensor's attributes passed as media device's platform data
> * @asd: asynchronous subdev registration data structure
> * @subdev: image sensor v4l2 subdev
> * @host: fimc device the sensor is currently linked to
> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
> index 35cb0162085b..234e047e3e8f 100644
> --- a/drivers/media/platform/exynos4-is/mipi-csis.c
> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c
> @@ -183,7 +183,7 @@ struct csis_drvdata {
> * @index: the hardware instance index
> * @pdev: CSIS platform device
> * @phy: pointer to the CSIS generic PHY
> - * @regs: mmaped I/O registers memory
> + * @regs: mmapped I/O registers memory
> * @supplies: CSIS regulator supplies
> * @clock: CSIS clocks
> * @irq: requested s5p-mipi-csis irq number
> @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
> goto err;
> }
>
> - /* Get MIPI CSI-2 bus configration from the endpoint node. */
> + /* Get MIPI CSI-2 bus configuration from the endpoint node. */
> of_property_read_u32(node, "samsung,csis-hs-settle",
> &state->hs_settle);
> state->wclk_ext = of_property_read_bool(node,
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 70a2833db0d1..af76eb637773 100644
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam)
> * bit 8 ~ bit 15: HS_SETTLE
> * Time interval during which the HS
> * receiver shall ignore any Data Lane
> - * HS transistions.
> - * The vaule has been calibrated on
> + * HS transitions.
> + * The value has been calibrated on
> * different boards. It seems to work well.
> *
> * More detail please refer
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> index ad1cff306efd..e5abb1abb3a3 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> @@ -41,7 +41,7 @@
> #define MTK_MDP_CTX_ERROR BIT(5)
>
> /**
> - * struct mtk_mdp_pix_align - alignement of image
> + * struct mtk_mdp_pix_align - alignment of image
> * @org_w: source alignment of width
> * @org_h: source alignment of height
> * @target_w: dst alignment of width
> @@ -122,8 +122,8 @@ struct mtk_mdp_frame {
> /**
> * struct mtk_mdp_variant - image processor variant information
> * @pix_max: maximum limit of image size
> - * @pix_min: minimun limit of image size
> - * @pix_align: alignement of image
> + * @pix_min: minimum limit of image size
> + * @pix_align: alignment of image
> * @h_scale_up_max: maximum scale-up in horizontal
> * @v_scale_up_max: maximum scale-up in vertical
> * @h_scale_down_max: maximum scale-down in horizontal
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> index ba619647bc10..794aba685120 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb)
> ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg);
> if (ret || !res_chg) {
> /*
> - * fb == NULL menas to parse SPS/PPS header or
> + * fb == NULL means to parse SPS/PPS header or
> * resolution info in src_mem. Decode can fail
> * if there is no SPS header or picture info
> * in bs
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index 8aba69555b12..e7e2a108def9 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -151,9 +151,9 @@ struct mtk_q_data {
> * @intra_period: I frame period
> * @gop_size: group of picture size, it's used as the intra frame period
> * @framerate_num: frame rate numerator. ex: framerate_num=30 and
> - * framerate_denom=1 menas FPS is 30
> + * framerate_denom=1 means FPS is 30
> * @framerate_denom: frame rate denominator. ex: framerate_num=30 and
> - * framerate_denom=1 menas FPS is 30
> + * framerate_denom=1 means FPS is 30
> * @h264_max_qp: Max value for H.264 quantization parameter
> * @h264_profile: V4L2 defined H.264 profile
> * @h264_level: V4L2 defined H.264 level
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index d1f12257bf66..2af654240d96 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx,
> param->input_yuv_fmt = VENC_YUV_FORMAT_NV21;
> break;
> default:
> - mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc);
> + mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc);
> break;
> }
> param->h264_profile = enc_params->h264_profile;
> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> index aa3ce41898bc..02c960c63ac0 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> @@ -55,7 +55,7 @@ struct h264_fb {
>
> /**
> * struct h264_ring_fb_list - ring frame buffer list
> - * @fb_list : frame buffer arrary
> + * @fb_list : frame buffer array
> * @read_idx : read index
> * @write_idx : write index
> * @count : buffer count in list
> @@ -72,7 +72,7 @@ struct h264_ring_fb_list {
> /**
> * struct vdec_h264_dec_info - decode information
> * @dpb_sz : decoding picture buffer size
> - * @resolution_changed : resoltion change happen
> + * @resolution_changed : resolution change happen
> * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer
> * @reserved : for 8 bytes alignment
> * @bs_dma : Input bit-stream buffer dma address
> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> index 3e84a761db3a..bac3723038de 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base {
> /**
> * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode
> * @wq_hd : Wait queue to wait VPU message ack
> - * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie
> + * @signaled : 1 - Host has received ack message from VPU, 0 - not receive
> * @failure : VPU execution result status 0 - success, others - fail
> * @inst_addr : VPU decoder instance address
> */
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> index ded1154481cd..9a21591f3818 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx);
> * vdec_if_decode() - trigger decode
> * @ctx : [in] v4l2 context
> * @bs : [in] input bitstream
> - * @fb : [in] frame buffer to store decoded frame, when null menas parse
> + * @fb : [in] frame buffer to store decoded frame, when null means parse
> * header only
> * @res_chg : [out] resolution change happens if current bs have different
> * picture width/height
> diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> index cd37bb2a610f..79d8eac7f5e2 100644
> --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len);
> /**
> * vpu_dec_end - end decoding, basically the function will be invoked once
> * when HW decoding done interrupt received successfully. The
> - * decoder in VPU will continute to do referene frame management
> + * decoder in VPU will continue to do reference frame management
> * and check if there is a new decoded frame available to display.
> *
> * @vpu : instance for vdec_vpu_inst
> diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
> index ff3de2dce5a2..37f0d7146dfa 100644
> --- a/drivers/media/platform/omap/omap_vout.c
> +++ b/drivers/media/platform/omap/omap_vout.c
> @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
> }
> timing = &dssdev->panel.timings;
>
> - /* We dont support RGB24-packed mode if vrfb rotation
> + /* We don't support RGB24-packed mode if vrfb rotation
> * is enabled*/
> if ((is_rotation_enabled(vout)) &&
> f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
> @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
> vout->fbuf.fmt.width = timing->x_res;
> }
>
> - /* change to samller size is OK */
> + /* change to smaller size is OK */
>
> bpp = omap_vout_try_format(&f->fmt.pix);
> f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp;
> diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
> index 56b630b1c8b4..c740393c8509 100644
> --- a/drivers/media/platform/omap/omap_voutdef.h
> +++ b/drivers/media/platform/omap/omap_voutdef.h
> @@ -37,7 +37,7 @@
> #define VID_MAX_WIDTH 1280 /* Largest width */
> #define VID_MAX_HEIGHT 720 /* Largest height */
>
> -/* Mimimum requirement is 2x2 for DSS */
> +/* Minimum requirement is 2x2 for DSS */
> #define VID_MIN_WIDTH 2
> #define VID_MIN_HEIGHT 2
>
> @@ -135,7 +135,7 @@ struct omap_vout_device {
> enum omap_color_mode dss_mode;
>
> /* we don't allow to request new buffer when old buffers are
> - * still mmaped
> + * still mmapped
> */
> int mmap_count;
>
> diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
> index 13f2828d880d..bd57174d81a7 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp)
> *
> * To solve this problem power management support is split into prepare/complete
> * and suspend/resume operations. The pipelines are stopped in prepare() and the
> - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
> + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in
> * resume(), and the the pipelines are restarted in complete().
> *
> * TODO: PM dependencies between the ISP and sensors are not modelled explicitly
> diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
> index 14a1c24037c4..261ad1175f98 100644
> --- a/drivers/media/platform/omap3isp/ispccdc.c
> +++ b/drivers/media/platform/omap3isp/ispccdc.c
> @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
> return 0;
>
> /* We're in continuous mode, and memory writes were disabled due to a
> - * buffer underrun. Reenable them now that we have a buffer. The buffer
> + * buffer underrun. Re-enable them now that we have a buffer. The buffer
> * address has been set in ccdc_video_queue.
> */
> if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) {
> @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc)
> * data to memory the CCDC and LSC are stopped immediately but
> * without change the CCDC stopping state machine. The CCDC
> * stopping state machine should be used only when user request
> - * for stopping is received (SINGLESHOT is an exeption).
> + * for stopping is received (SINGLESHOT is an exception).
> */
> switch (ccdc->state) {
> case ISP_PIPELINE_STREAM_SINGLESHOT:
> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c
> index 9c180f607bcb..da66ea65be5d 100644
> --- a/drivers/media/platform/omap3isp/ispcsi2.c
> +++ b/drivers/media/platform/omap3isp/ispcsi2.c
> @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2,
>
> /* Skip interrupts until we reach the frame skip count. The CSI2 will be
> * automatically disabled, as the frame skip count has been programmed
> - * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
> + * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it.
> *
> * It would have been nice to rely on the FRAME_NUMBER interrupt instead
> * but it turned out that the interrupt is only generated when the CSI2
> diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
> index 3cf3c6390cc8..4fe228752a43 100644
> --- a/drivers/media/platform/pxa_camera.c
> +++ b/drivers/media/platform/pxa_camera.c
> @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev)
>
> pcdev->channels = 1;
>
> - /* Make choises, based on platform preferences */
> + /* Make choices, based on platform preferences */
> if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
> (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
> if (pcdev->platform_flags & PXA_CAMERA_HSP)
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 79c7e816c706..7a3feb5cee00 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -219,7 +219,7 @@ struct venus_buffer {
> #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb)
>
> /**
> - * struct venus_inst - holds per instance paramerters
> + * struct venus_inst - holds per instance parameters
> *
> * @list: used for attach an instance to the core
> * @lock: instance lock
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index beb9248992a4..2207a31d355e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin)
> break;
> }
>
> - /* Enable VSYNC Field Toogle mode after one VSYNC input */
> + /* Enable VSYNC Field Toggle mode after one VSYNC input */
> if (vin->info->model == RCAR_GEN3)
> dmr2 = VNDMR2_FTEV;
> else
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index 7a2851790b91..7cbdcbf9b090 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin,
> * The V4L2 specification clearly documents the colorspace fields
> * as being set by drivers for capture devices. Using the values
> * supplied by userspace thus wouldn't comply with the API. Until
> - * the API is updated force fixed vaules.
> + * the API is updated force fixed values.
> */
> pix->colorspace = RVIN_DEFAULT_COLORSPACE;
> pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin)
> v4l2_info(&vin->v4l2_dev, "Removing %s\n",
> video_device_node_name(&vin->vdev));
>
> - /* Checks internaly if vdev have been init or not */
> + /* Checks internally if vdev have been init or not */
> video_unregister_device(&vin->vdev);
> }
>
> diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
> index 96d1b1b3fe8e..843e50d17a72 100644
> --- a/drivers/media/platform/rockchip/rga/rga-hw.c
> +++ b/drivers/media/platform/rockchip/rga/rga-hw.c
> @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> }
>
> /*
> - * Cacluate the up/down scaling mode/factor.
> + * Calculate the up/down scaling mode/factor.
> *
> * RGA used to scale the picture first, and then rotate second,
> * so we need to swap the w/h when rotate degree is 90/270.
> @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> }
>
> /*
> - * Cacluate the framebuffer virtual strides and active size,
> + * Calculate the framebuffer virtual strides and active size,
> * note that the step of vir_stride / vir_width is 4 byte words
> */
> src_vir_info.data.vir_stride = ctx->in.stride >> 2;
> @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> dst_act_info.data.act_width = dst_w - 1;
>
> /*
> - * Cacluate the source framebuffer base address with offset pixel.
> + * Calculate the source framebuffer base address with offset pixel.
> */
> src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y,
> src_w, src_h);
> diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h
> index 1f5c8c94ce89..be5e7357dffc 100644
> --- a/drivers/media/platform/s3c-camif/camif-core.h
> +++ b/drivers/media/platform/s3c-camif/camif-core.h
> @@ -260,7 +260,7 @@ struct camif_vp {
> * @clock: clocks required for the CAMIF operation
> * @lock: mutex protecting this data structure
> * @slock: spinlock protecting CAMIF registers
> - * @io_base: start address of the mmaped CAMIF registers
> + * @io_base: start address of the mmapped CAMIF registers
> */
> struct camif_dev {
> struct media_device media_dev;
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h
> index 90fda4b720eb..144c102ff05f 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h
> @@ -153,7 +153,7 @@ struct s5p_jpeg_variant {
>
> /**
> * struct jpeg_fmt - driver's internal color format data
> - * @name: format descritpion
> + * @name: format description
> * @fourcc: the fourcc code, 0 if not applicable
> * @depth: number of bits per pixel
> * @colplanes: number of color planes (1 for packed formats)
> @@ -193,7 +193,7 @@ struct s5p_jpeg_marker {
> * @sos: SOS marker's position relative to the buffer beginning
> * @dht: DHT markers' positions relative to the buffer beginning
> * @dqt: DQT markers' positions relative to the buffer beginning
> - * @sof: SOF0 marker's postition relative to the buffer beginning
> + * @sof: SOF0 marker's position relative to the buffer beginning
> * @sof_len: SOF0 marker's payload length (without length field itself)
> * @components: number of image components
> * @size: image buffer size in bytes
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> index 20442a9b9f7a..24148020baa9 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf {
> * @enc_ctrl_handler: control framework handler for encoding
> * @pm: power management control
> * @variant: MFC hardware variant information
> - * @num_inst: couter of active MFC instances
> + * @num_inst: counter of active MFC instances
> * @irqlock: lock for operations on videobuf2 queues
> * @condlock: lock for changing/checking if a context is ready to be
> * processed
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> index ee7b15b335e0..9f832ba7bc8c 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
> struct firmware *fw_blob;
> int i, err = -EINVAL;
>
> - /* Firmare has to be present as a separate file or compiled
> + /* Firmware has to be present as a separate file or compiled
> * into kernel. */
> mfc_debug_enter();
>
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> index f4c0e3a8f27d..e111f9c47179 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv,
> int i;
>
> if (buf->memory != V4L2_MEMORY_MMAP) {
> - mfc_err("Only mmaped buffers can be used\n");
> + mfc_err("Only mmapped buffers can be used\n");
> return -EINVAL;
> }
> mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> index 0913881219ff..6144e95f6425 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
> @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
> * First set the output frame buffers
> */
> if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
> - mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n");
> + mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n");
> return -EAGAIN;
> }
> if (list_empty(&ctx->src_queue)) {
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> index 7c629be43205..281699ab7fe1 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx)
> return 0;
> }
>
> -/* Release temproary buffers for decoding */
> +/* Release temporary buffers for decoding */
> static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx)
> {
> /* NOP */
> @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
>
> if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
> mfc_err("It seems that not all destination buffers were\n"
> - "mmaped.MFC requires that all destination are mmaped\n"
> + "mmapped.MFC requires that all destination are mmapped\n"
> "before starting processing.\n");
> return -EAGAIN;
> }
> diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> index 3dbb3a287cc0..c9d6021904cd 100644
> --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h
> @@ -193,7 +193,7 @@ struct c8sectpfei {
> #define C8SECTPFE_SYS_ENABLE BIT(0)
>
> /*
> - * Ponter record data structure required for each input block
> + * Pointer record data structure required for each input block
> * see Table 82 on page 167 of functional specification.
> */
>
> diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h
> index 2ba99922c05b..914556030e70 100644
> --- a/drivers/media/platform/sti/delta/delta.h
> +++ b/drivers/media/platform/sti/delta/delta.h
> @@ -286,7 +286,7 @@ struct delta_dec {
> * Header parsing must be done using decode(), giving
> * explicitly header access unit or first access unit of bitstream.
> * If no valid header is found, get_streaminfo will return -ENODATA,
> - * in this case the next bistream access unit must be decoded till
> + * in this case the next bitstream access unit must be decoded till
> * get_streaminfo becomes successful.
> */
> int (*get_streaminfo)(struct delta_ctx *ctx,
> diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c
> index b61a5d337d2a..c34f7cf5aed2 100644
> --- a/drivers/media/platform/sti/hva/hva-h264.c
> +++ b/drivers/media/platform/sti/hva/hva-h264.c
> @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx,
> td->frame_width = frame_width;
> td->frame_height = frame_height;
>
> - /* set frame alignement */
> + /* set frame alignment */
> td->window_width = frame_width;
> td->window_height = frame_height;
> td->window_horizontal_offset = 0;
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 6732874114cf..5fe5b38fa901 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier,
>
> dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev));
>
> - /* Checks internaly if vdev has been init or not */
> + /* Checks internally if vdev has been init or not */
> video_unregister_device(dcmi->vdev);
> }
>
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> index 0bb000712c33..85f97d4f086e 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat,
> int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable);
>
> /**
> - * sun6i_csi_update_config() - update the csi register setttings
> + * sun6i_csi_update_config() - update the csi register settings
> * @csi: pointer to the csi
> * @config: see struct sun6i_csi_config
> */
> diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c
> index e2cf2b90e500..1da2cb3aaf0c 100644
> --- a/drivers/media/platform/ti-vpe/vpdma.c
> +++ b/drivers/media/platform/ti-vpe/vpdma.c
> @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf);
>
> /*
> * unmap descriptor/payload DMA buffer, disabling DMA access and
> - * allowing the main processor to acces the data
> + * allowing the main processor to access the data
> */
> void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf)
> {
> @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list)
> EXPORT_SYMBOL(vpdma_reset_desc_list);
>
> /*
> - * free the buffer allocated fot the VPDMA descriptor list, this should be
> + * free the buffer allocated for the VPDMA descriptor list, this should be
> * called when the user doesn't want to use VPDMA any more.
> */
> void vpdma_free_desc_list(struct vpdma_desc_list *list)
> @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
> * append an outbound data transfer descriptor to the given descriptor list,
> * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel
> *
> - * @list: vpdma desc list to which we add this decriptor
> + * @list: vpdma desc list to which we add this descriptor
> * @width: width of the image in pixels in memory
> * @c_rect: compose params of output image
> * @fmt: vpdma data format of the buffer
> @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd)
> * max_width: enum for maximum width of data transfer
> * max_height: enum for maximum height of data transfer
> * chan: VPDMA channel
> - * flags: VPDMA flags to configure some descriptor fileds
> + * flags: VPDMA flags to configure some descriptor fields
> */
> void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width,
> int stride, const struct v4l2_rect *c_rect,
> @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd);
> * append an inbound data transfer descriptor to the given descriptor list,
> * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel
> *
> - * @list: vpdma desc list to which we add this decriptor
> + * @list: vpdma desc list to which we add this descriptor
> * @width: width of the image in pixels in memory(not the cropped width)
> * @c_rect: crop params of input image
> * @fmt: vpdma data format of the buffer
> * dma_addr: dma address as seen by VPDMA
> * chan: VPDMA channel
> * field: top or bottom field info of the input image
> - * flags: VPDMA flags to configure some descriptor fileds
> + * flags: VPDMA flags to configure some descriptor fields
> * frame_width/height: the complete width/height of the image presented to the
> * client (this makes sense when multiple channels are
> * connected to the same client, forming a larger frame)
> @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num)
> }
> EXPORT_SYMBOL(vpdma_get_list_mask);
>
> -/* clear previosuly occured list intterupts in the LIST_STAT register */
> +/* clear previously occurred list interupts in the LIST_STAT register */
> void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
> int list_num)
> {
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index d70871d0ad2d..207e7e76c048 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx)
> /*
> * we make sure that the source image has a 16 byte aligned
> * stride, we need to do the same for the motion vector buffer
> - * by aligning it's stride to the next 16 byte boundry. this
> + * by aligning it's stride to the next 16 byte boundary. this
> * extra space will not be used by the de-interlacer, but will
> * ensure that vpdma operates correctly
> */
> diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c
> index 5e50178b057d..58ad248cd7f7 100644
> --- a/drivers/media/platform/vsp1/vsp1_brx.c
> +++ b/drivers/media/platform/vsp1/vsp1_brx.c
> @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity,
> /*
> * The hardware is extremely flexible but we have no userspace API to
> * expose all the parameters, nor is it clear whether we would have use
> - * cases for all the supported modes. Let's just harcode the parameters
> + * cases for all the supported modes. Let's just hardcode the parameters
> * to sane default values for now.
> */
>
> @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity,
> vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
>
> /*
> - * Harcode the blending formula to
> + * Hardcode the blending formula to
> *
> * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
> * DSTa = DSTa * (1 - SRCa) + SRCa
> diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c
> index 18f98838111b..08a825c3a3f6 100644
> --- a/drivers/media/platform/xilinx/xilinx-vip.c
> +++ b/drivers/media/platform/xilinx/xilinx-vip.c
> @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size);
> * the register, otherwise the bitmask is cleared from the register
> * when the flag @set is false.
> *
> - * Fox eample, this function can be used to set a control with a boolean value
> + * Fox example, this function can be used to set a control with a boolean value
> * requested by users. If the caller knows whether to set or clear in the first
> * place, the caller should call xvip_clr() or xvip_set() directly instead of
> * using this function.
> --
> 2.20.1
>
--
Regards,
Niklas Söderlund
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
