That property is no used in mainline and is not documented. The only board using that property is the rk33-99-evb-rev1 and -rev2 in the vendor kernel. The existence of a further -rev3 (which also looks way better cared for compared rev1+2) indicates that the older ones are probably some sort of preproduction models, where some wiring (on the soc or board) may have gone wrong. It is also not clear why this is a hardware-description or a DT property, so, as noboby seems to care of this just drop reading that property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx> --- Hi all, This patch was send for the first time within these series [1], but might have more sense sent alone as doesn't depedends on the rest of the series, so, remove from these series and send a second version that can be applied independently. Best regards, Enric [1] https://lkml.org/lkml/2018/8/15/141 Changes in v2: - Split from the first version and send as a separate patch. - Include the research that Heiko did in the commit message. drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index a1f2253d60c1..ba07121c3eff 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -168,9 +168,6 @@ struct rockchip_usb2phy_cfg { * @phy: generic phy. * @port_id: flag for otg port or host port. * @suspended: phy suspended flag. - * @utmi_avalid: utmi avalid status usage flag. - * true - use avalid to get vbus status - * false - use bvalid to get vbus status * @vbus_attached: otg device vbus status. * @bvalid_irq: IRQ number assigned for vbus valid rise detection. * @ls_irq: IRQ number assigned for linestate detection. @@ -189,7 +186,6 @@ struct rockchip_usb2phy_port { struct phy *phy; unsigned int port_id; bool suspended; - bool utmi_avalid; bool vbus_attached; int bvalid_irq; int ls_irq; @@ -545,12 +541,8 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) unsigned long delay; bool vbus_attach, sch_work, notify_charger; - if (rport->utmi_avalid) - vbus_attach = property_enabled(rphy->grf, - &rport->port_cfg->utmi_avalid); - else - vbus_attach = property_enabled(rphy->grf, - &rport->port_cfg->utmi_bvalid); + vbus_attach = property_enabled(rphy->grf, + &rport->port_cfg->utmi_bvalid); sch_work = false; notify_charger = false; @@ -1024,9 +1016,6 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); - rport->utmi_avalid = - of_property_read_bool(child_np, "rockchip,utmi-avalid"); - /* * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate * interrupts muxed together, so probe the otg-mux interrupt first, -- 2.20.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
