Re: [PATCH 4/4] dt-bindings: phy-rockchip-inno-usb2: add new rockchip,force-bvalid property.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Missatge de Rob Herring <robh@xxxxxxxxxx> del dia dj., 16 d’ag. 2018 a les 0:26:
>
> On Wed, Aug 15, 2018 at 11:59:34AM +0200, Enric Balletbo i Serra wrote:
> > This property is used when the otg-id pin is not connected. When this
> > property is set it forces to set the B-Device Session Valid bit when the
> > port works as device and clears that bit when the port works as host.
> >
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> > ---
> >
> >  .../devicetree/bindings/phy/phy-rockchip-inno-usb2.txt       | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> > index 2d4808d3920b..55761f466c41 100644
> > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> > @@ -48,6 +48,11 @@ Optional properties:
> >               See ./phy-bindings.txt for details.
> >   - rockchip,utmi-avalid : boolean, use the avalid register to get vbus status.
> >                         Otherwise, use the bvalid register.
> > + - rockchip,force-bvalid : boolean, set this to force the B-Device Session
> > +                       Valid bit when the usb port is in device mode. This
> > +                       is used when the otg-id pin is not connected.
> > +                       Only supported in case of compatible being:
> > +                       * "rockchip,rk3399-usb2phy"
>
> Shouldn't you describe the property of the h/w that ID pin is not
> connected, rather than what you do with that information.
>

What about "rockchip, otg-id-not-connected"?

> Is the pin not connected because it's a connector without ID pin? If so,
> that should be a property of the connector (or inferred from the
> connector compatible string).
>

No, it's not the connector. it is not wired on the phy and the cable
detection is done via an extcon.

Thanks,
 Enric

> Rob
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux