Re: [PATCH 1/1] mfd: rk808: Prepare rk805 for poweroff

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/9/19 3:07 PM, Heiko Stübner wrote:
Hi Stefan, Lee,

Am Dienstag, 2. Oktober 2018, 09:38:29 CET schrieb Stefan Mavrodiev:
RK805 has SLEEP signal, which can put the device into SLEEP or OFF
mode. The default is SLEEP mode.

However, when the kernel performs power-off (actually the ATF) the
device will not go fully off and this will result in higher power
consumption and inability to wake the device with RTC alarm.

The solution is to enable pm_power_off_prepare function, which will
configure SLEEP pin for OFF function.

Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx>
just found this while cleaning my inbox and this change looks
significant and it seems hasn't been applied yet.

I guess this is still relevant, right?

Yes, but I guess it's out-of-sync with the latest kernel.



Heiko

---
  drivers/mfd/rk808.c | 24 ++++++++++++++++++++++++
  1 file changed, 24 insertions(+)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 216fbf6..50f3f78 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -387,6 +387,25 @@ static void rk805_device_shutdown(void)
  		dev_err(&rk808_i2c_client->dev, "power off error!\n");
  }

+static void rk805_device_shutdown_prepare(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk805, so do nothing here\n");
+
+		return;
+	}
+
+	ret = regmap_update_bits(rk808->regmap,
+				 RK805_GPIO_IO_POL_REG,
+				 SLP_SD_MSK, SHUTDOWN_FUN);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
  static void rk808_device_shutdown(void)
  {
  	int ret;
@@ -549,6 +568,10 @@ static int rk808_probe(struct i2c_client *client,
  	if (pm_off && !pm_power_off) {
  		rk808_i2c_client = client;
  		pm_power_off = pm_pwroff_fn;
+	} else if (pm_off && !pm_power_off_prepare &&
+		   rk808->variant == RK805_ID) {
+		rk808_i2c_client = client;
+		pm_power_off_prepare = rk805_device_shutdown_prepare;
  	}

  	return 0;
@@ -564,6 +587,7 @@ static int rk808_remove(struct i2c_client *client)

  	regmap_del_irq_chip(client->irq, rk808->irq_data);
  	pm_power_off = NULL;
+	pm_power_off_prepare = NULL;

  	return 0;
  }




_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux