Am Samstag, 1. Dezember 2018, 11:08:16 CET schrieb Oskari Lemmela: > Rockpro64 is not able boot if GPIO1_C1 pin is pulled high > before loading linux kernel. > > In rockpro64 GPIO1_C1 pin is connected vdd_cpu_b regulator > VSEL pin. Pin should be pulled down in normal operation and > pulled high in suspend. > > PMIC LDO_REG2 is connected to touch panel connector. > Rename regulator and set it to correct voltage. > > PCIe power is controller by GPIO1_D0. > > Schematics can be downloaded from: > http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf > > Signed-off-by: Oskari Lemmela <oskari@xxxxxxxxxxx> applied as fix for 4.20 Thanks Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
