DSI controllers are also the hosts of their dsi bus and therefore contain
nodes describing the attached panels with their reg properties containing
the virtual ids.
The dsi controller nodes on rk3399 lacked the #address-cells and #size-cells
for these subnodes, so add them.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
changes in v2: none
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index c88e603396f6..4ac7bf547916 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1720,6 +1720,8 @@
resets = <&cru SRST_P_MIPI_DSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
@@ -1754,6 +1756,8 @@
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
--
2.17.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
