Hi Damian, Am Montag, 24. September 2018, 13:40:03 CEST schrieb Damian Kos: > > Am Donnerstag, 20. September 2018, 16:54:40 CEST schrieb Damian Kos: > > > From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx> > > > > > > This adds basic support for Cadence MHDP DPI to DP bridge. > > > > > > Basically, it takes a DPI stream as input and output it encoded in DP > > > format. It's missing proper HPD, HDCP and currently supports only SST > > > mode. > > > > > > Changes made in the low level driver (cdn-dp-reg.*): > > > - moved it to from drivers/gpu/drm/rockchip to > > > drivers/gpu/drm/bridge/cdns-mhdp-common.* > > > - functions for sending/receiving commands are now public > > > - added functions for reading registers and link training > > > adjustment > > > > > > Changes made in RK's driver (cdn-dp-core.*): > > > - Moved audio_info and audio_pdev fields from cdn_dp_device to > > > cdns_mhdp_device structure. > > > > > > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx> > > > Signed-off-by: Damian Kos <dkos@xxxxxxxxxxx> > > > > [...] > > > > > diff --git a/drivers/gpu/drm/rockchip/Kconfig > > > b/drivers/gpu/drm/rockchip/Kconfig > > > index 0ccc76217ee4..129b0529f3e1 100644 > > > --- a/drivers/gpu/drm/rockchip/Kconfig > > > +++ b/drivers/gpu/drm/rockchip/Kconfig > > > @@ -27,7 +27,9 @@ config ROCKCHIP_ANALOGIX_DP > > > > > > config ROCKCHIP_CDN_DP > > > bool "Rockchip cdn DP" > > > - depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m) > > > + depends on DRM_ROCKCHIP=m > > > > Sorry, I wasn't fast enough in my reply to you mail to catch that before your v4, but I don't think this is necessary. > > Instead I do guess, the select below should do the right thing by making EXTCON=y if DRM_ROCKCHIP=y. > > > > Somewhat clumsily verified by making EXTCON=m in my defconfig and seeing get changed to y upon build, which I guess comes from a different "select" in the config. > > > > I've changed it to: > > config ROCKCHIP_CDN_DP > bool "Rockchip cdn DP" > depends on DRM_ROCKCHIP > select EXTCON if DRM_ROCKCHIP=y > select DRM_CDNS_MHDP > help... > > and it seems that there are no issues. At least for me. > > Please let me know if that's OK. nope, just do "select EXTCON" . It works nicely and the above would not select EXTCON at all if the the rockchip-drm driver gets built into the kernel. To be sure I just did a little experiment and added: diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 4ad85c046dcd..64e2b096afd8 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -154,4 +154,11 @@ source "drivers/gpu/drm/bridge/ite/Kconfig" source "drivers/gpu/drm/bridge/synopsys/Kconfig" +config DRM_TMP1 + tristate "option to select" + +config DRM_TMP2 + tristate "option doing the selecting" + select DRM_TMP1 + If I select DRM_TMP2=m as module I end up with CONFIG_DRM_TMP1=m CONFIG_DRM_TMP2=m in the defconfig and wit DRM_TMP2=y it changes to CONFIG_DRM_TMP1=y CONFIG_DRM_TMP2=y so all is well with just doing "select EXTCON" above and will select the correct "m" or "y" stance as needed. Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
