Hi David, I've adpated your patches 1+2 like so and would like to add them this way later on. Biggest change is of course making patch 1 solely about moving the shared parts to the dtsi and adding the tinker-s.dts including the emmc in the second patch. Apart from that you can also see some previously missing style-related fixes. For example patch subject lines are somewhat specific, to allow people browsing the git history to realize the core patch contents just from the "headline" and also use the "correct" prefixes which vary depending on the subsystem your changing. For future patches you can just do a "git log --oneline arch/arm/boot/dts" (change directory depending on location of the change of course), to see that arm32 dts use "ARM: dts: $soc-vendor: foo". Also providing a commit message describing the individual change in a bit more detail is important. The wifi patch is a different issue, so I'll reply there. Heiko David Summers (2): ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi ARM: dts: rockchip: add rk3288-based Tinker board S .../devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-tinker-s.dts | 26 + arch/arm/boot/dts/rk3288-tinker.dts | 498 +---------------- arch/arm/boot/dts/rk3288-tinker.dtsi | 504 ++++++++++++++++++ 5 files changed, 537 insertions(+), 496 deletions(-) create mode 100644 arch/arm/boot/dts/rk3288-tinker-s.dts create mode 100644 arch/arm/boot/dts/rk3288-tinker.dtsi -- 2.18.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
