Re: [PATCH v5 5/6] media: Add controls for JPEG quantization tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, 2018-09-10 at 10:25 -0300, Ezequiel Garcia wrote:
> Hi Hans,
> 
> Thanks for the review.
> 
> On Mon, 2018-09-10 at 14:42 +0200, Hans Verkuil wrote:
> > On 09/06/2018 12:00 AM, Ezequiel Garcia wrote:
> > > From: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> > > 
> > > Add V4L2_CID_JPEG_QUANTIZATION compound control to allow userspace
> > > configure the JPEG quantization tables.
> > > 
> > > Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> > > Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> > > ---
> > >  .../media/uapi/v4l/extended-controls.rst      | 31 +++++++++++++++++++
> > >  .../media/videodev2.h.rst.exceptions          |  1 +
> > >  drivers/media/v4l2-core/v4l2-ctrls.c          | 10 ++++++
> > >  include/uapi/linux/v4l2-controls.h            | 12 +++++++
> > >  include/uapi/linux/videodev2.h                |  1 +
> > >  5 files changed, 55 insertions(+)
> > > 
> > > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> > > index 9f7312bf3365..1335d27d30f3 100644
> > > --- a/Documentation/media/uapi/v4l/extended-controls.rst
> > > +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> > > @@ -3354,7 +3354,38 @@ JPEG Control IDs
> > >      Specify which JPEG markers are included in compressed stream. This
> > >      control is valid only for encoders.
> > >  
> > > +.. _jpeg-quant-tables-control:
> > >  
> > > +``V4L2_CID_JPEG_QUANTIZATION (struct)``
> > > +    Specifies the luma and chroma quantization matrices for encoding
> > > +    or decoding a V4L2_PIX_FMT_JPEG_RAW format buffer. The :ref:`itu-t81`
> > > +    specification allows 8-bit quantization coefficients for
> > > +    baseline profile images, and 8-bit or 16-bit for extended profile
> > > +    images. Supporting or not 16-bit precision coefficients is driver-specific.
> > > +    Coefficients must be set in JPEG zigzag scan order.
> > > +
> > > +
> > > +.. c:type:: struct v4l2_ctrl_jpeg_quantization
> > > +
> > > +.. cssclass:: longtable
> > > +
> > > +.. flat-table:: struct v4l2_ctrl_jpeg_quantization
> > > +    :header-rows:  0
> > > +    :stub-columns: 0
> > > +    :widths:       1 1 2
> > > +
> > > +    * - __u8
> > > +      - ``precision``
> > > +      - Specifies the coefficient precision. User shall set 0
> > > +        for 8-bit, and 1 for 16-bit.
> > 
> > So does specifying 1 here switch the HW encoder to use extended profile?
> > What if the HW only supports baseline? The rockchip driver doesn't appear
> > to check the precision field at all...
> > 
> 
> The driver is missing to check that, when the user sets this control.
> 
> > I think this needs a bit more thought.
> > 
> > I am not at all sure that this is the right place for the precision field.
> > This is really about JPEG profiles, so I would kind of expect a JPEG PROFILE
> > control (just like other codec profiles), or possibly a new pixelformat for
> > extended profiles.
> > 
> > And based on that the driver would interpret these matrix values as 8 or
> > 16 bits.
> > 
> 
> Right, the JPEG profile control is definitely needed. I haven't add it because
> it wouldn't be used, since this VPU can only do baseline.

Well, I suppose it would still be relevant that you add it for the
encoder and only report baseline there.

> However, the problem is that some JPEGs in the wild have with 8-bit data and
> 16-bit quantization coefficients, as per [1] and [2]:
> 
> [1] https://github.com/martinhath/jpeg-rust/issues/1
> [2] https://github.com/libjpeg-turbo/libjpeg-turbo/pull/90
> 
> So, in order to support decoding of these images, I've added the precision
> field to the quantization control. The user would be able to set a baseline
> or extended profile thru a (future) profile control, and if 16-bit
> tables are found, and if the hardware supports them, the driver
> would be able to support them.
>
> Another option, which might be even better, is have explicit baseline
> and extended quantization tables controls, e.g.: V4L2_CID_JPEG_QUANT
> and V4L2_CID_JPEG_EXT_QUANT.

I think this makes more sense than a common structure with an indication
bit on how to interpret the data.

However, it seems problematic that userspace can't figure out whether
16-bit quant tables are supported with a baseline profile and just has
to try and see.

Hans, do you think this is an acceptable approach or should we rather
stick to the standard here, at the cost of not supporting these pictures
that were encoded with this common abuse of the standard?

Cheers,

Paul

-- 
Developer of free digital technology and hardware support.

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux