The rk3188 also supports bringing the uart2 out through
the usb dm+dp pins, so add the necessary setup for it.
rk3066 does not seem to support usb-uart functionality and this
particular phy was only used on older Rockchip socs, so this leaves
room for a bit of cleanup as well, as there most likely won't be new
additions in the driver.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
drivers/phy/rockchip/phy-rockchip-usb.c | 141 ++++++++++++++++--------
1 file changed, 95 insertions(+), 46 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index 3378eeb7a562..456fa703e4f0 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -36,7 +36,22 @@ static int enable_usb_uart;
#define HIWORD_UPDATE(val, mask) \
((val) | (mask) << 16)
-#define UOC_CON0_SIDDQ BIT(13)
+#define UOC_CON0 0x00
+#define UOC_CON0_SIDDQ BIT(13)
+#define UOC_CON0_DISABLE BIT(4)
+#define UOC_CON0_COMMON_ON_N BIT(0)
+
+#define UOC_CON2 0x08
+#define UOC_CON2_SOFT_CON_SEL BIT(2)
+
+#define UOC_CON3 0x0c
+/* bits present on rk3188 and rk3288 phys */
+#define UOC_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
+#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
+#define UOC_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
+#define UOC_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
+#define UOC_CON3_UTMI_OPMODE_MASK (3 << 1)
+#define UOC_CON3_UTMI_SUSPENDN BIT(0)
struct rockchip_usb_phys {
int reg;
@@ -46,7 +61,8 @@ struct rockchip_usb_phys {
struct rockchip_usb_phy_base;
struct rockchip_usb_phy_pdata {
struct rockchip_usb_phys *phys;
- int (*init_usb_uart)(struct regmap *grf);
+ int (*init_usb_uart)(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata);
int usb_uart_phy;
};
@@ -313,28 +329,88 @@ static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
},
};
+static int __init rockchip_init_usb_uart_common(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
+{
+ int regoffs = pdata->phys[pdata->usb_uart_phy].reg;
+ int ret;
+ u32 val;
+
+ /*
+ * COMMON_ON and DISABLE settings are described in the TRM,
+ * but were not present in the original code.
+ * Also disable the analog phy components to save power.
+ */
+ val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N
+ | UOC_CON0_DISABLE
+ | UOC_CON0_SIDDQ,
+ UOC_CON0_COMMON_ON_N
+ | UOC_CON0_DISABLE
+ | UOC_CON0_SIDDQ);
+ ret = regmap_write(grf, regoffs + UOC_CON0, val);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL,
+ UOC_CON2_SOFT_CON_SEL);
+ ret = regmap_write(grf, regoffs + UOC_CON2, val);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING
+ | UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC
+ | UOC_CON3_UTMI_TERMSEL_FULLSPEED,
+ UOC_CON3_UTMI_SUSPENDN
+ | UOC_CON3_UTMI_OPMODE_MASK
+ | UOC_CON3_UTMI_XCVRSEELCT_MASK
+ | UOC_CON3_UTMI_TERMSEL_FULLSPEED);
+ ret = regmap_write(grf, UOC_CON3, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+#define RK3188_UOC0_CON0 0x10c
+#define RK3188_UOC0_CON0_BYPASSSEL BIT(9)
+#define RK3188_UOC0_CON0_BYPASSDMEN BIT(8)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * See description of rk3288-variant for details.
+ */
+static int __init rk3188_init_usb_uart(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
+{
+ u32 val;
+ int ret;
+
+ ret = rockchip_init_usb_uart_common(grf, pdata);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL
+ | RK3188_UOC0_CON0_BYPASSDMEN,
+ RK3188_UOC0_CON0_BYPASSSEL
+ | RK3188_UOC0_CON0_BYPASSDMEN);
+ ret = regmap_write(grf, RK3188_UOC0_CON0, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static const struct rockchip_usb_phy_pdata rk3188_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
{ /* sentinel */ }
},
+ .init_usb_uart = rk3188_init_usb_uart,
+ .usb_uart_phy = 0,
};
-#define RK3288_UOC0_CON0 0x320
-#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0)
-#define RK3288_UOC0_CON0_DISABLE BIT(4)
-
-#define RK3288_UOC0_CON2 0x328
-#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2)
-
#define RK3288_UOC0_CON3 0x32c
-#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0)
-#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
-#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1)
-#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
-#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
-#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
@@ -353,40 +429,13 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = {
*
* The actual code in the vendor kernel does some things differently.
*/
-static int __init rk3288_init_usb_uart(struct regmap *grf)
+static int __init rk3288_init_usb_uart(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
{
u32 val;
int ret;
- /*
- * COMMON_ON and DISABLE settings are described in the TRM,
- * but were not present in the original code.
- * Also disable the analog phy components to save power.
- */
- val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
- | RK3288_UOC0_CON0_DISABLE
- | UOC_CON0_SIDDQ,
- RK3288_UOC0_CON0_COMMON_ON_N
- | RK3288_UOC0_CON0_DISABLE
- | UOC_CON0_SIDDQ);
- ret = regmap_write(grf, RK3288_UOC0_CON0, val);
- if (ret)
- return ret;
-
- val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
- RK3288_UOC0_CON2_SOFT_CON_SEL);
- ret = regmap_write(grf, RK3288_UOC0_CON2, val);
- if (ret)
- return ret;
-
- val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
- | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
- | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
- RK3288_UOC0_CON3_UTMI_SUSPENDN
- | RK3288_UOC0_CON3_UTMI_OPMODE_MASK
- | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
- | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
- ret = regmap_write(grf, RK3288_UOC0_CON3, val);
+ ret = rockchip_init_usb_uart_common(grf, pdata);
if (ret)
return ret;
@@ -516,7 +565,7 @@ static int __init rockchip_init_usb_uart(void)
return PTR_ERR(grf);
}
- ret = data->init_usb_uart(grf);
+ ret = data->init_usb_uart(grf, data);
if (ret) {
pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
enable_usb_uart = 0;
--
2.17.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
