Hi, Am Mittwoch, 1. August 2018, 10:45:15 CEST schrieb cl@xxxxxxxxxxxxxx: > From: Liang Chen <cl@xxxxxxxxxxxxxx> > > This patch adds core dtsi file for Rockchip PX30 SoCs. > > Signed-off-by: Liang Chen <cl@xxxxxxxxxxxxxx> applied with the following changes: - some reordering - cpu properties should be present in all cpu nodes (clocks etc) - added dma-names to uarts - dropped #dma-cells from uarts+spi (only for dma-controllers) - dropped phy-names from usb nodes without actual phys (please readd once you have phy support) - dropped the gamma_lut + reg-names and spanned the registers till below the iommu, similar to all other socs we have - dropped the high_speed pinctrl state from the spi nodes (not part of mainline dt-binding) - dropped peripherals-req-type-burst from the dmac (not part of mainline dt-binding) - split out dwc2 into separate patch to be applied once the binding lands - set #sound-dai-cells in px30.dtsi ... property of the i2s controller and doesn't change per board Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
