On Mon, Jul 30, 2018 at 10:12:01AM +0800, djw@xxxxxxxxxxxxx wrote: > From: Levin Du <djw@xxxxxxxxxxxxx> > > ROC-RK3399-PC is a power efficient 4GB LPDDR4 single board > computer with USB 3.0 and Gigabit Ethernet in a form factor > compatible with the Raspberry Pi. It is based on the Rockchip > RK3399 SoC, powered by the Type-C port. > > The devicetree currently supports peripherals of: > > - Ethernet > - HDMI > - SD Card > - UART2 debug > - Type-C > - eMMC > > USB3 in Type-C port currently only works with normal orientation, > not flip one. > > Signed-off-by: Levin Du <djw@xxxxxxxxxxxxx> > > --- > > Changes in v2: > - remove custom brightness-levels (use calculated one in pwm_bl driver) > - remove redundant 'dr_mode="otg"' in usbdrd_dwc3_0 > > Changes in v1: > - remove bootargs > - use interpolation for brightness level > - add vcc_vbus_typec1 regulator > - fix phy-supply of u2phy0_otg and u2phy1_otg > - remove vcc_hub_en dummy regualtor > - add hub_rst (changed to output high) to pinctrl status of vcc5v0_host > - remove vsel-gpios props in fan53xx > - remove mp8859 in i2c > - fusb302: fix interrupt setting > - fusb302: add vbus-supply > - remove extcon in tcphy0 and tcphy1 > - remove #sound-dai-cells in i2s* > - use RK_PXX style bit number for cd-gpios in SDMMC > - clean commented status lines > > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 682 +++++++++++++++++++++ > 3 files changed, 687 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts Reviewed-by: Rob Herring <robh@xxxxxxxxxx> _______________________________________________ Linux-rockchip mailing list Linux-rockchip@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-rockchip
