The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node
to the rk3328 soc devicetree.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Tested-by: Robin Murphy <robin.murphy at arm.com>
---
changes in v2:
- adapt to changed clock names
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 60b3ed5918e7..04d81ea0924e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -645,6 +645,20 @@
status = "disabled";
};
+ hdmiphy: phy at ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller at ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
--
2.17.0
