The updated dtc emits a warning for the edp-panel of two rk3288 boards:
Warning (graph_endpoint): /dp at ff970000/ports/port at 1/endpoint: graph node unit address error, expected "0"
Fix this by adding the necessary @0 to the endpoint node.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 39b61dce97ad..1c4dfd94e555 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -232,7 +232,7 @@
#address-cells = <1>;
#size-cells = <0>;
- edp_out_panel: endpoint {
+ edp_out_panel: endpoint at 0 {
reg = <0>;
remote-endpoint = <&panel_in_edp>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index b16d570ff029..acf5f8a2307d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -174,7 +174,7 @@
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
- edp_out_panel: endpoint {
+ edp_out_panel: endpoint at 0 {
reg = <0>;
remote-endpoint = <&panel_in_edp>;
};
--
2.17.0
