Just use the API instead of open-coding it, no functional change
intended.
Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
---
drivers/phy/rockchip/phy-rockchip-emmc.c | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 512a6ef..c65979b 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -79,6 +79,9 @@
#define PHYCTRL_IS_CALDONE(x) \
((((x) >> PHYCTRL_CALDONE_SHIFT) & \
PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
+#define PHYCTRL_IS_DLLRDY(x) \
+ ((((x) >> PHYCTRL_DLLRDY_SHIFT) & \
+ PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE)
struct rockchip_emmc_phy {
unsigned int reg_offset;
@@ -93,7 +96,6 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
unsigned int dllrdy;
unsigned int freqsel = PHYCTRL_FREQSEL_200M;
unsigned long rate;
- unsigned long timeout;
/*
* Keep phyctrl_pdb and phyctrl_endll low to allow
@@ -222,19 +224,10 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
* only at boot / resume. In both cases, eMMC is probably on the
* critical path so busy waiting a little extra time should be OK.
*/
- timeout = jiffies + msecs_to_jiffies(50);
- do {
- udelay(1);
-
- regmap_read(rk_phy->reg_base,
- rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
- &dllrdy);
- dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK;
- if (dllrdy == PHYCTRL_DLLRDY_DONE)
- break;
- } while (!time_after(jiffies, timeout));
-
- if (dllrdy != PHYCTRL_DLLRDY_DONE) {
+ if (regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+ dllrdy, PHYCTRL_IS_DLLRDY(dllrdy),
+ 1, 50 * USEC_PER_MSEC)) {
pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n");
return -ETIMEDOUT;
}
--
1.9.1
