The power button is located on the daughterboard. Signed-off-by: Vicente Bergas <vicencb at gmail.com> Tested-by: Vicente Bergas <vicencb at gmail.com> --- .../dts/rockchip/rk3399-sapphire-excavator.dts | 23 ---------------------- arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 23 ++++++++++++++++++++++ 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 6027846ffd3e..6ff9d222d839 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -41,7 +41,6 @@ */ /dts-v1/; -#include <dt-bindings/input/input.h> #include "rk3399-sapphire.dtsi" / { @@ -95,22 +94,6 @@ }; }; - keys: gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = <KEY_POWER>; - linux,input-type = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_btn>; - wakeup-source; - }; - }; - rt5651-sound { compatible = "simple-audio-card"; simple-audio-card,name = "realtek,rt5651-codec"; @@ -208,12 +191,6 @@ }; &pinctrl { - buttons { - pwr_btn: pwr-btn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 21b05601f04a..6918eb2d1390 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -41,6 +41,7 @@ */ #include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/input/input.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -102,6 +103,22 @@ regulator-max-microvolt = <12000000>; }; + keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + linux,input-type = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_btn>; + wakeup-source; + }; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -475,6 +492,12 @@ }; &pinctrl { + buttons { + pwr_btn: pwr-btn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = -- 2.16.2