Enables the audio codec on the Haikou Baseboard when used with a RK3399-Q7. Changes in v3: - split i2s0 move from rk3399-puma-haikou.dts to rk3399-puma.dtsi into it's own patch - use dashe? in node names - added missing vin-supply properties to regulators had to add an additional regulator to model this correctly - simple overwrite pins in i2s0_2ch_bus instead of deleting and redefining the node Changes in v2: - reordered entries as suggested in review - removed a conflicting i2s definition in rk3399-puma-haikou.dts i2s0 was already enabled in rk3399-puma.dtsi as it should be, so reuse it and fix the incorrect rockchip,*-channels values - add a patch to the series that definies a generic i2s0-2ch-bus - overwrite the generic pin definition of i2s0-2ch-bus with a specific one used in the Haikou with RK3399-Q7 setup Klaus Goger (2): arm64: dts: rockchip: move i2s0 node from baseboard to SoM arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 71 +++++++++++++++++++--- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 22 +++++++ 2 files changed, 85 insertions(+), 8 deletions(-) -- 2.11.0
