For veyron the binding should provide both PWM timings, the delay between
you enable the PWM and set the enable signal, and the delay between you
disable the PWM signal and clear the enable signal. Update the binding
accordingly, in this case the panels connected to the veyron boards have
a symmetric power sequence, hence the same value is used.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Acked-by: Pavel Machek <pavel at ucw.cz>
---
Changes since v4:
- Rebased on top of mainline.
Changes since v3:
- Use new -ms names for proprieties.
Changes since v2:
- Use new names for proprieties.
Changes since v1:
- Add this new patch to fix current binding on veyron.
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index be487111d025..b16d570ff029 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -95,7 +95,8 @@
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 0>;
- pwm-delay-us = <10000>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
};
gpio-charger {
--
2.15.1
