Kishon, On Thu, Sep 21, 2017 at 3:36 AM, Kishon Vijay Abraham I <kishon at ti.com> wrote: > Hi Douglas, > > On Wednesday 20 September 2017 01:26 AM, Douglas Anderson wrote: >> When connecting to certain DP monitors it was observed that only one >> of the two orientations of the type C to DP cable would work. >> Debugging showed that the problem was that we needed to set the type C >> "flip" state earlier. Once we did this, problems went away. >> >> While trying to dig into this problem and some others, I found that >> the proper documentation for the Type C PHY was available to me. This >> allowed me to cleanup the magic numbers in the funtion that I was >> touching and also fix a few minor issues that (luckily) haven't caused >> any problems yet. >> >> I also found that aux channel communications were flaky on some >> adapters until I adjusted the voltage swing. > > From the commit log, looks like only the 1st and 4th patch are fixes. Only > those can go in -rc cycle. But I can't apply the 4th patch without the 2nd and > 3rd patch. > > Can you resend the series such that 2nd and 3rd patch apply on top of 1st and > 4th patch? Good point. Done. You should have just received v3 of the series. :) -Doug
