Hi Linus, Am Samstag, 7. Oktober 2017, 12:32:51 CEST schrieb Linus Walleij: > On Sat, Sep 30, 2017 at 5:07 PM, Heiko Stuebner <heiko at sntech.de> wrote: > > Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu: > >> If the gmac-m1 optimization(bit10) is selected, the gpio function > >> of gmac pins is not valid. We may use the rmii mode for gmac interface, > >> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not > >> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2, > >> and gmac_rxd0m3 select bit10 is more correct. > >> > >> Signed-off-by: David Wu <david.wu at rock-chips.com> > > > > the patch subject should mention the the rk3328 whose routing gets fixed > > (like adding a simple "on rk3328" to it), otherwise > > > > Reviewed-by: Heiko Stuebner <heiko at sntech.de> > > I added rk3328 to it, also assumed this Reviewed-by covers patch 1/2 > as well and applied both with your tag. while I did mean to cross-check patch 1/2 separately with the soc manual, I got sidetracked with my current vacation :-) . Anyway, it did look ok on first glance then and I also cannot find issues with it now. So all is good. Heiko
