Am Mittwoch, 1. M?rz 2017, 23:38:49 CET schrieb Heiko Stuebner:
> As reported by Lorenzo, the residency/latency values defined in the
> idle-state for rk3368 "make no sense". When introducing them I
> simply took the idle-state node from the vendor kernel in error
> as I didn't look up if these values were sane in the first place.
>
> Talking to people and determining why they were used in this way
> showed that it was meant to make sure the cpu_suspend callback
> got initialized which at the 3.10 time was somehow required even
> for wfi-based idle handling.
>
> Of course the generic arch_cpu_idle() now does wfi-based idle-handling
> already, so there is no need for this.
>
> Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
applied for 4.12 with Lorenzo's Ack after clarifying in the last paragraph:
"Of course the generic arch_cpu_idle() now does wfi-based idle-handling
already and the rk3368 does not implement any other idle states than
the default WFI, so these wrong idle-states should go away."
> ---
> This has been sitting ere for way to long :-(, but finally I got
> to finish the change.
>
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 20 --------------------
> 1 file changed, 20 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 49d1191..5471ace 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -107,23 +107,10 @@
> };
> };
>
> - idle-states {
> - entry-method = "psci";
> -
> - cpu_sleep: cpu-sleep-0 {
> - compatible = "arm,idle-state";
> - arm,psci-suspend-param = <0x1010000>;
> - entry-latency-us = <0x3fffffff>;
> - exit-latency-us = <0x40000000>;
> - min-residency-us = <0xffffffff>;
> - };
> - };
> -
> cpu_l0: cpu at 0 {
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
>
> #cooling-cells = <2>; /* min followed by max */
> @@ -133,7 +120,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
>
> @@ -141,7 +127,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x2>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
>
> @@ -149,7 +134,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x3>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
>
> @@ -157,7 +141,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x100>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
>
> #cooling-cells = <2>; /* min followed by max */
> @@ -167,7 +150,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x101>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
>
> @@ -175,7 +157,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x102>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
>
> @@ -183,7 +164,6 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x103>;
> - cpu-idle-states = <&cpu_sleep>;
> enable-method = "psci";
> };
> };
