Hi David, On 03/02/2017 03:11 PM, David Wu wrote: > From: "david.wu" <david.wu at rock-chips.com> You do not need to add this when you send mail for yourself, it's need when you send mail for others. > > To prevent external signal crosstalk, some pins need to > enable input schmitt, like i2c pins, 32k-input pin and so on. > > Signed-off-by: david.wu <david.wu at rock-chips.com> Better to use "David Wu" for full name, you can correct this in your gitconfig file. Thanks, - Kever > --- > changes in v2: > - check the return value (Heiko) > > drivers/pinctrl/pinctrl-rockchip.c | 73 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 73 insertions(+) > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index a20ce9f..9b8d516 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -308,6 +308,9 @@ struct rockchip_pin_ctrl { > int *reg, u8 *bit); > void (*iomux_recalc)(u8 bank_num, int pin, int *reg, > u8 *bit, int *mask); > + int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit); > }; > > struct rockchip_pin_config { > @@ -1355,6 +1358,57 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, > return ret; > } > > +static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret; > + u8 bit; > + u32 data; > + > + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); > + if (ret) > + return ret; > + > + ret = regmap_read(regmap, reg, &data); > + if (ret) > + return ret; > + > + data >>= bit; > + return data & 0x1; > +} > + > +static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, int enable) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret; > + unsigned long flags; > + u8 bit; > + u32 data, rmask; > + > + dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n", > + bank->bank_num, pin_num, enable); > + > + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); > + if (ret) > + return ret; > + > + spin_lock_irqsave(&bank->slock, flags); > + > + /* enable the write to the equivalent lower bits */ > + data = BIT(bit + 16) | (enable << bit); > + rmask = BIT(bit + 16) | BIT(bit); > + > + ret = regmap_update_bits(regmap, reg, rmask, data); > + spin_unlock_irqrestore(&bank->slock, flags); > + > + return ret; > +} > + > /* > * Pinmux_ops handling > */ > @@ -1574,6 +1628,15 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, > if (rc < 0) > return rc; > break; > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: > + if (!info->ctrl->schmitt_calc_reg) > + return -ENOTSUPP; > + > + rc = rockchip_set_schmitt(bank, > + pin - bank->pin_base, arg); > + if (rc < 0) > + return rc; > + break; > default: > return -ENOTSUPP; > break; > @@ -1634,6 +1697,16 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, > > arg = rc; > break; > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: > + if (!info->ctrl->schmitt_calc_reg) > + return -ENOTSUPP; > + > + rc = rockchip_get_schmitt(bank, pin - bank->pin_base); > + if (rc < 0) > + return rc; > + > + arg = rc; > + break; > default: > return -ENOTSUPP; > break;