Hi Klaus, Am Montag, 26. Juni 2017, 21:18:54 CEST schrieb Klaus Goger: > The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 > connector) system-on-module from Theobroma Systems, featuring the > Rockchip RK3399. > > It provides the following feature set: > * up to 4GB DDR3 > * on-module SPI-NOR flash > * on-module eMMC (with 8-bit 1.8V interface) > * SD card (on a baseboad) via edge connector > * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY > * HDMI/eDP/2x MIPI-DSI > * 2x MIPI-CSI > * USB > - 1x USB 3.0 dual-role (direct connection) > - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) > * on-module STM32 Cortex-M0 companion controller, implementing: > - low-power RTC functionality (ISL1208 emulation) > - fan controller (AMC6821 emulation) > - USB<->CAN bridge controller > > Signed-off-by: Klaus Goger <klaus.goger at theobroma-systems.com> > > --- > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > arch/arm64/boot/dts/rockchip/rk3399-puma.dts | 650 +++++++++++++++++++++++++++ One thing I forgot to address was the SOM'nes of the puma board. People might want to use that with different base-boards so you might want to split this up into a rk3399-puma-som.dtsi and for example rk3399-puma-haikou.dts for the Puma + Haikou Q7 combination. Examples for such a split may be the rk3288-phycore, rk3288-rock2 and rk3288-firefly-reload. Heiko
