keep-power-in-suspend was invented for SDIO only, so it should
not be used for eMMC node.
Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 1 -
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index e430fac..13a9e22 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -86,7 +86,6 @@
cap-mmc-highspeed;
clock-frequency = <150000000>;
disable-wp;
- keep-power-in-suspend;
mmc-hs200-1_8v;
no-sdio;
no-sd;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index ba1d981..2821671 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -632,7 +632,6 @@
&sdhci {
bus-width = <8>;
- keep-power-in-suspend;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
--
1.9.1
