Hi John
On 02/01/2017 03:22 AM, Sean Paul wrote:
> On Sun, Jan 29, 2017 at 01:24:42PM +0000, John Keeping wrote:
>
> Reviewed-by: Sean Paul <seanpaul at chromium.org>
>
>> Signed-off-by: John Keeping <john at metanate.com>
>> Reviewed-by: Chris Zhong <zyw at rock-chips.com>
>> ---
>> v3:
>> - Add Chris' Reviewed-by
>> Unchanged in v2
>>
>> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 16 +++++++++-------
>> 1 file changed, 9 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> index 5bad92e2370e..58cb8ace2fe8 100644
>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> @@ -82,6 +82,7 @@
>> #define FRAME_BTA_ACK BIT(14)
>> #define ENABLE_LOW_POWER (0x3f << 8)
>> #define ENABLE_LOW_POWER_MASK (0x3f << 8)
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
>> #define VID_MODE_TYPE_BURST_SYNC_PULSES 0x2
This field indicates the video mode transmission type as follows:
00: Non-burst with sync pulses
01: Non-burst with sync events
10 and 11: Burst mode
So, I think define the macro like this is better:
#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES 0x0
#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
#define VID_MODE_TYPE_BURST 0x2
>> #define VID_MODE_TYPE_MASK 0x3
>>
>> @@ -286,6 +287,7 @@ struct dw_mipi_dsi {
>> u32 format;
>> u16 input_div;
>> u16 feedback_div;
>> + unsigned long mode_flags;
>>
>> const struct dw_mipi_dsi_plat_data *pdata;
>> };
>> @@ -551,15 +553,10 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> return -EINVAL;
>> }
>>
>> - if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
>> - !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
>> - dev_err(dsi->dev, "device mode is unsupported\n");
>> - return -EINVAL;
>> - }
>> -
>> dsi->lanes = device->lanes;
>> dsi->channel = device->channel;
>> dsi->format = device->format;
>> + dsi->mode_flags = device->mode_flags;
>> dsi->panel = of_drm_find_panel(device->dev.of_node);
>> if (dsi->panel)
>> return drm_panel_attach(dsi->panel, &dsi->connector);
>> @@ -716,7 +713,12 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> {
>> u32 val;
>>
>> - val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
>> + val = ENABLE_LOW_POWER;
>> +
>> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> + val |= VID_MODE_TYPE_BURST_SYNC_PULSES;
>> + else if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
>> + val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
val |= VID_MODE_TYPE_BURST;
else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
else
val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>>
>> dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> }
>> --
>> 2.11.0.197.gb556de5.dirty
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
