Enable the graphics-related nodes on the rk3399-firefly which makes it possible to see output on the on-board hdmi output. Signed-off-by: Heiko Stuebner <heiko at sntech.de> --- arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 7fd4bfcaa38e..05fb773f975b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -255,6 +255,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -728,3 +733,23 @@ status = "okay"; dr_mode = "host"; }; + +&vopb { + assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>, <&cru DCLK_VOP0>; + assigned-clock-rates = <400000000>, <200000000>, <100000000>; + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>, <&cru DCLK_VOP1>; + assigned-clock-rates = <400000000>, <200000000>, <100000000>; + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; -- 2.14.1