Add thermal zone and dynamic CPU power coefficients for RV1108
Signed-off-by: Rocky Hao <rocky.hao at rock-chips.com>
---
arch/arm/boot/dts/rv1108.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index dbdd8c2180e7..cae920b6a145 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rv1108-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -69,6 +70,8 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <75>;
};
};
@@ -275,6 +278,43 @@
status = "disabled";
};
+ thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <50>;
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ target: trip-point1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ soc_crit: soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+
+ };
+
tsadc: tsadc at 10370000 {
compatible = "rockchip,rv1108-tsadc";
reg = <0x10370000 0x100>;
--
1.9.1
