Am Freitag, 18. August 2017, 21:34:44 CEST schrieb Klaus Goger: > The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 > connector) system-on-module from Theobroma Systems, featuring the > Rockchip RK3399. > > It provides the following feature set: > * up to 4GB DDR3 > * on-module SPI-NOR flash > * on-module eMMC (with 8-bit 1.8V interface) > * SD card (on a baseboad) via edge connector > * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY > * HDMI/eDP/2x MIPI-DSI > * 2x MIPI-CSI > * USB > - 1x USB 3.0 dual-role (direct connection) > - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) > * on-module STM32 Cortex-M0 companion controller, implementing: > - low-power RTC functionality (ISL1208 emulation) > - fan controller (AMC6821 emulation) > - USB<->CAN bridge controller > > Signed-off-by: Klaus Goger <klaus.goger at theobroma-systems.com> > --- > > Changes in v2: > ? split SoM parts into it's own dtsi > - use dashes in phandles as I was stumbling over this comment and checked the patch for it, dashes in node-names, underscores in phandles (phandles are the references defined in front of nodes and used later). The patch itself is doing things correctly, so it's only a wording issue here :-) Otherwise looks good, just need Rob looking at the bindings things. I'll probably find some properties to move around when applying (to conform to sorting expectations) Heiko
