Hi Rob, On 2017/8/11 1:06, Rob Herring wrote: > On Thu, Aug 03, 2017 at 04:09:12PM +0800, Frank Wang wrote: >> Add otg-mux property to support multiplexed interrupt in otg-port >> on some Rockchip SoC (e.g RV1108). >> >> Signed-off-by: Frank Wang <frank.wang at rock-chips.com> >> --- >> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++- >> 1 file changed, 5 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt >> index ddf868a..ed6aee4 100644 >> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt >> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt >> @@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides. >> Required properties (port (child) node): >> - #phy-cells : must be 0. See ./phy-bindings.txt for details. >> - interrupts : specify an interrupt for each entry in interrupt-names. >> - - interrupt-names : a list which shall be the following entries: >> + - interrupt-names : a list which should be one of the following cases: >> + Regular case: >> * "otg-id" : for the otg id interrupt. >> * "otg-bvalid" : for the otg vbus interrupt. >> * "linestate" : for the host/otg linestate interrupt. >> + Some SoCs use one interrupt with the obove muxed together, so for these > s/obove/above/ Sorry, thanks for your reminding and will fix. BR. Frank > > With that, > > Acked-by: Rob Herring <robh at kernel.org> > > >
