Hi Sean,
On 09/12/2016 09:51 PM, Sean Paul wrote:
> On Fri, Sep 9, 2016 at 5:44 AM, Yakir Yang <ykk at rock-chips.com> wrote:
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v3:
>> - Suggested by Sean
>>
>> Changes in v2: None
>>
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 ++-
>> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 18 +++++++++---------
>> 2 files changed, 11 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> index a15f076..d564e90 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> @@ -16,10 +16,11 @@
>> #include <drm/drm_crtc.h>
>> #include <drm/drm_dp_helper.h>
>>
>> -#define DP_TIMEOUT_LOOP_COUNT 100
>> #define MAX_CR_LOOP 5
>> #define MAX_EQ_LOOP 5
>>
>> +#define DP_TIMEOUT_LOOP_MS msecs_to_jiffies(1)
> The name suggests the units here are ms, but you're storing jiffies.
> Do the msecs_to_jiffies conversion down below.
I suddenly realized that 'analogix_dp_core.c' also used the
'DP_TIMEOUT_LOOP_COUNT' macros, and 'analogix_dp_core.c' have four kinds
of timeout,
- DP_TIMEOUT_LOOP_COUNT * 1us
- DP_TIMEOUT_LOOP_COUNT * 10us
- DP_TIMEOUT_LOOP_COUNT * 100us
- DP_TIMEOUT_LOOP_COUNT * 1000us
I may guess it's not necessary to replace the 'DP_TIMEOUT_LOOP_COUNT'
now :-)
- Yakir
>
>> +
>> /* DP_MAX_LANE_COUNT */
>> #define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
>> #define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> index a4d17b8..15a4cf0 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> @@ -335,7 +335,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
>> void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
>> {
>> u32 reg;
>> - int timeout_loop = 0;
>> + unsigned long timeout;
>>
>> analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
>>
>> @@ -350,9 +350,9 @@ void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
>> if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> analogix_dp_set_pll_power_down(dp, 0);
>>
>> + timeout = jiffies + DP_TIMEOUT_LOOP_MS;
> timeout = jiffies + msecs_to_jiffies(DP_TIMEOUT_LOOP_MS);
>
>> while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> - timeout_loop++;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + if (time_after(jiffies, timeout)) {
>> dev_err(dp->dev, "failed to get pll lock status\n");
>> return;
>> }
>> @@ -501,7 +501,7 @@ int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
>> {
>> int reg;
>> int retval = 0;
>> - int timeout_loop = 0;
>> + unsigned long timeout;
>>
>> /* Enable AUX CH operation */
>> reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
>> @@ -509,10 +509,10 @@ int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
>> writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
>>
>> /* Is AUX CH command reply received? */
>> + timeout = jiffies + DP_TIMEOUT_LOOP_MS;
>> reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
>> while (!(reg & RPLY_RECEIV)) {
>> - timeout_loop++;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + if (time_after(jiffies, timeout)) {
>> dev_err(dp->dev, "AUX CH command reply failed!\n");
>> return -ETIMEDOUT;
>> }
>> @@ -1055,7 +1055,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
>> {
>> u32 reg;
>> u8 *buffer = msg->buffer;
>> - int timeout_loop = 0;
>> + unsigned long timeout;
>> unsigned int i;
>> int num_transferred = 0;
>>
>> @@ -1123,10 +1123,10 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
>>
>> /* Is AUX CH command reply received? */
>> /* TODO: Wait for an interrupt instead of looping? */
>> + timeout = jiffies + DP_TIMEOUT_LOOP_MS;
>> reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
>> while (!(reg & RPLY_RECEIV)) {
>> - timeout_loop++;
>> - if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
>> + if (time_after(jiffies, timeout)) {
>> dev_err(dp->dev, "AUX CH command reply failed!\n");
>> return -ETIMEDOUT;
>> }
>> --
>> 1.9.1
>>
>>
>
>
