On 09/13/2016 07:06 PM, Heiko Stuebner wrote: > Hi Randy, > > could you check if the other host-only dwc2 are also affected by this (rk3188, > rk3036) please? Because they also seem to act up in some strange way But I don't have those board currently. I would arrange them anyway. Btw, I would send a new version to correct the fault reported by the auto build machine. > sometimes. > > Thanks > Heiko > > Am Samstag, 10. September 2016, 02:59:36 CEST schrieb Randy Li: >> At this stage it is the only "full features" and well verified >> USB EHCI controller in this platform. More review is always necessary. >> >> Changelog: >> - v7: >> adding a wrapper for the reset operation for phy >> using that wrapper >> - v6: >> move pwms pinctrl to pwms node >> fix the order of the dtb file in Makefile >> - v5: >> - correct the mail format >> - v4: >> - re-order some nodes in alphabetical order >> - fix some minor bugs >> - add a entry in vendor list >> - v3: >> - fixing the rtc clock, using clock source from PMIC >> - enable the tmu >> - enable the fimc for elite board >> - suuport the audio codec at elite board >> - fixing minor bugs in the last commit >> - v2: >> - removing rtc node >> the clock source driver is not done yet. >> - adding exynos-bus >> - fixing the MFC >> >> Randy Li (4): >> phy: Add reset callback >> phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during >> wakeup >> usb: dwc2: assert phy reset when waking up in rk3288 platform >> ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset >> >> .../devicetree/bindings/phy/rockchip-usb-phy.txt | 3 +++ >> arch/arm/boot/dts/rk3288.dtsi | 4 ++++ >> drivers/phy/phy-core.c | 14 ++++++++++++++ >> drivers/phy/phy-rockchip-usb.c | 20 >> ++++++++++++++++++++ drivers/usb/dwc2/core_intr.c | >> 11 +++++++++++ include/linux/phy/phy.h | 3 >> +++ >> 6 files changed, 55 insertions(+)
