Heiko Stuebner <heiko at sntech.de> writes: > Am Montag, 10. Oktober 2016, 20:44:22 CEST schrieb Shawn Lin: >> When testing SD hotplug automatically, I got bunch of >> useless log like this: >> >> [ 588.357838] mmc0: card 0007 removed >> [ 589.492664] rockchip-iodomain ff770000.syscon:io-domains: Setting to >> 3300000 done [ 589.500698] vccio_sd: ramp_delay not set >> [ 589.504817] rockchip-iodomain ff770000.syscon:io-domains: Setting to >> 3300000 done [ 589.669705] rockchip-iodomain ff770000.syscon:io-domains: >> Setting to 3300000 done [ 589.677593] vccio_sd: ramp_delay not set >> [ 589.681581] rockchip-iodomain ff770000.syscon:io-domains: Setting to >> 1800000 done [ 590.032820] dwmmc_rockchip ff0c0000.dwmmc: Successfully >> tuned phase to 140 [ 590.039725] mmc0: new ultra high speed SDR50 SDHC >> card at address 0007 [ 590.046641] mmcblk0: mmc0:0007 SD32G 29.3 GiB >> [ 590.052163] mmcblk0: p1 >> >> Moreover the code is intent to print the 'uV' for debug but >> later print it using dev_info. It looks more like to me that >> it should be the real intention of the code. Anyway, let's >> mark this verbose log as debug message. >> >> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com> > > reducing the amount of logs, especially for information not generally needed > looks sane > > Reviewed-by: Heiko Stuebner <heiko at sntech.de> Acked-by: Kevin Hilman <khilman at baylibre.com> Rafael, feel free to apply directly as a fix for v4.9-rc, or wait for v4.10 if you prefer. Kevin
