DMA controller driver is in good shape these days on rockchip platforms.
So lets enable DMA for uart and mmc.
Signed-off-by: Pawe? Jarosz <paweljarosz3691 at gmail.com>
---
arch/arm/boot/dts/rk3066a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index fc8dcc7..2f09cf1 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -637,16 +637,25 @@
&mmc0 {
clock-frequency = <50000000>;
+ dmas = <&dmac2 1>;
+ dma-names = "rx-tx";
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
};
&mmc1 {
+ dmas = <&dmac2 3>;
+ dma-names = "rx-tx";
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
};
+&emmc {
+ dmas = <&dmac2 4>;
+ dma-names = "rx-tx";
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
@@ -678,21 +687,29 @@
};
&uart0 {
+ dmas = <&dmac1_s 0>, <&dmac1_s 1>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
};
&uart1 {
+ dmas = <&dmac1_s 2>, <&dmac1_s 3>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&uart2 {
+ dmas = <&dmac2 6>, <&dmac2 7>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
&uart3 {
+ dmas = <&dmac2 8>, <&dmac2 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
};
--
2.7.4
