David,
On Wed, May 4, 2016 at 7:13 AM, David Wu <david.wu at rock-chips.com> wrote:
> Signed-off-by: David Wu <david.wu at rock-chips.com>
> ---
> Change in v7:
> - none
>
> drivers/i2c/busses/i2c-rk3x.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 80bed02..7e45d51 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -90,6 +90,26 @@ struct rk3x_i2c_soc_data {
> int grf_offset;
> };
>
> +/**
> + * struct rk3x_i2c - private data of the controller
> + * @adap: corresponding I2C adapter
> + * @dev: device for this controller
> + * @soc_data: related soc data struct
> + * @regs: virtual memory area
> + * @clk: clock of i2c bus
> + * @clk_rate_nb: i2c clk rate change notify
> + * @t: I2C known timing information
You're a little ahead of yourself. The @t element doesn't exist as of
this patch. Instead all the sub-elements are there. This in this
patch you need to document scl_frequency, scl_rise_ns, .... In a
later patch you'd change it to t.
-Doug
