Hi Heiko,
On 2016?03?28? 07:52, Heiko St?bner wrote:
> Hi Xing,
>
> Am Samstag, 26. M?rz 2016, 14:37:54 schrieb Xing Zheng:
>> Add devicetree bindings for Rockchip cru which found on
>> Rockchip SoCs.
>>
>> Signed-off-by: Xing Zheng<zhengxing at rock-chips.com>
>> Signed-off-by: Jianqun Xu<jay.xu at rock-chips.com>
>> Acked-by: Rob Herring<robh at kernel.org>
>> ---
>>
>> Changes in v5: None
>> Changes in v3: None
>> Changes in v2: None
>>
>> .../bindings/clock/rockchip,rk3399-cru.txt | 83
>> ++++++++++++++++++++ 1 file changed, 83 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-
> cru.txt
>> b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt new file
>> mode 100644
>> index 0000000..9427caa
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
>> @@ -0,0 +1,83 @@
>> +* Rockchip RK3399 Clock and Reset Unit
>> +
>> +The RK3399 clock controller generates and supplies clock to various
>> +controllers within the SoC and also implements a reset controller for SoC
>> +peripherals.
>> +
>> +Required Properties:
>> +
>> +- compatible: PMU for CRU should be "rockchip,rk3399-pmucru"
>> +- compatible: CRU should be "rockchip,rk3399-cru"
>> +- reg: physical base address of the controller and length of memory
> mapped
>> + region.
>> +- #clock-cells: should be 1.
>> +- #reset-cells: should be 1.
>> +
>> +Optional Properties:
>> +
>> +- rockchip,grf: phandle to the syscon managing the "general register
> files"
>> + If missing, pll rates are not changeable, due to the missing pll lock
>> status. +
> the rk3399 doesn't need the GRF, so we should drop this block for now
>
>> +Each clock is assigned an identifier and client nodes can use this
>> identifier +to specify the clock which they consume. All available clocks
>> are defined as +preprocessor macros in the dt-bindings/clock/rk3399-cru.h
>> headers and can be +used in device tree sources. Similar macros exist for
>> the reset sources in +these files.
>> +
>> +External clocks:
>> +
>> +There are several clocks that are generated outside the SoC. It is
> expected
>> +that they are defined using standard clock bindings with following
>> +clock-output-names:
>> + - "xin24m" - crystal input - required,
>> + - "xin32k" - rtc clock - optional,
>> + - "ext_i2s" - external I2S clock - optional,
>> + - "ext_gmac" - external GMAC clock - optional
>> + - "ext_hsadc" - external HSADC clock - optional,
>> + - "ext_isp" - external ISP clock - optional,
>> + - "ext_jtag" - external JTAG clock - optional
>> + - "ext_vip" - external VIP clock - optional,
>> + - "usbotg_out" - output clock of the pll in the otg phy
> external clock listing needs adjusting, something like
>
> - clkin_i2s
> - clkin_gmac
> --> remove ext_hsadc
> - clkin_cif
> --> remove ext_jtag
> --> remove ext_vip
> - clk_usbphy0_480m
> - clk_usbphy0_480m
>
> maybe?
Thanks, now they like this:
clock-output-names:
- "xin24m" - crystal input - required,
- "xin32k" - rtc clock - optional,
- "clkin_gmac" - external GMAC clock - optional,
- "gmac_phy_rx_clk" - external GMAC RX clock - optional,
- "clkin_i2s" - external I2S clock - optional,
- "pclkin_cif" - external ISP clock - optional,
- "clk_usbphy0_480m" - output clock of the pll in the usbphy0
- "clk_usbphy1_480m" - output clock of the pll in the usbphy1
>
>> +
>> +Example: General Register Files
>> +
>> + pmugrf: syscon at ff320000 {
>> + compatible = "rockchip,rk3399-pmugrf", "syscon";
>> + reg =<0x0 0xff320000 0x0 0x1000>;
>> + };
>> +
>> + grf: syscon at ff770000 {
>> + compatible = "rockchip,rk3399-grf", "syscon";
>> + reg =<0x0 0xff770000 0x0 0x10000>;
>> + };
>> +
>> +Example: Clock controller node:
>> +
>> + pmucru: pmu-clock-controller at ff750000 {
>> + compatible = "rockchip,rk3399-pmucru";
>> + reg =<0x0 0xff750000 0x0 0x1000>;
>> + rockchip,grf =<&pmugrf>;
>> + #clock-cells =<1>;
>> + #reset-cells =<1>;
>> + };
>> +
>> + cru: clock-controller at ff760000 {
>> + compatible = "rockchip,rk3399-cru";
>> + reg =<0x0 0xff760000 0x0 0x1000>;
>> + rockchip,grf =<&grf>;
>> + #clock-cells =<1>;
>> + #reset-cells =<1>;
>> + };
> also here drop grf nodes and rockchip,grf properties?
Done.
>
>
>> +
>> +Example: UART controller node that consumes the clock generated by the
>> clock + controller:
>> +
>> + uart0: serial at ff1a0000 {
>> + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
>> + reg =<0x0 0xff180000 0x0 0x100>;
>> + clocks =<&cru SCLK_UART0>,<&cru PCLK_UART0>;
>> + clock-names = "baudclk", "apb_pclk";
>> + interrupts =<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift =<2>;
>> + reg-io-width =<4>;
>> + };
>
>
Thanks.
--
- Xing Zheng
