On Friday 13 May 2016 04:13 AM, Brian Norris wrote: > From: Shawn Lin <shawn.lin at rock-chips.com> > > According to the databook, 10.2us is the max time for dll to be ready to > work. However in testing, some chips need 20us for dll to be ready. This > patch adds some extra margin for dllrdy to be ready, fixing our > -ETIMEDOUT issues. > > Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com> > Signed-off-by: Brian Norris <briannorris at chromium.org> Acked-by: Kishon Vijay Abraham I <kishon at ti.com> > --- > drivers/phy/phy-rockchip-emmc.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c > index 6ebcf3e41c46..48cbe691a889 100644 > --- a/drivers/phy/phy-rockchip-emmc.c > +++ b/drivers/phy/phy-rockchip-emmc.c > @@ -119,10 +119,11 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, > PHYCTRL_ENDLL_MASK, > PHYCTRL_ENDLL_SHIFT)); > /* > - * After enable analog DLL circuits, we need extra 10.2us > - * for dll to be ready for work. > + * After enable analog DLL circuits, we need an extra 10.2us > + * for dll to be ready for work. But according to testing, we > + * find some chips need more than 25us. > */ > - udelay(11); > + udelay(30); > regmap_read(rk_phy->reg_base, > rk_phy->reg_offset + GRF_EMMCPHY_STATUS, > &dllrdy); >
