Hi Heiko, On 2016/6/8 22:33, Heiko St?bner wrote: > Hi Frank, > > Am Dienstag, 7. Juni 2016, 17:15:52 schrieb Frank Wang: >> The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy >> IP block than rk3288 and before, and most of phy-related registers are >> also different from the past, so a new phy driver is required necessarily. >> >> These series patches add phy-rockchip-inno-usb2.c and the corresponding >> documentation. > please see the replies on the v3 thread (regarding handling of multiple phy > blocks) . > OK, I just got back from Dragon Boat Festival (one of the great traditions of my nation's festival), I will correct it and send out later today. BR. Frank >> Changes in v4: >> - Used 'phy-supply' instead of 'vbus_*-supply'. >> >> Changes in v3: >> - Supplemented some hardware-description into the devicetree bindings. >> - Resolved the mapping defect between fixed value in driver and the >> property in devicetree. >> - Code cleanup. >> >> Changes in v2: >> - Specified more hardware-description into the devicetree bindings. >> - Optimized some process of driver. >> >> Frank Wang (2): >> Documentation: bindings: add DT documentation for Rockchip USB2PHY >> phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy >> >> .../bindings/phy/phy-rockchip-inno-usb2.txt | 62 ++ >> drivers/phy/Kconfig | 7 + >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-rockchip-inno-usb2.c | 614 >> ++++++++++++++++++++ 4 files changed, 684 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create >> mode 100644 drivers/phy/phy-rockchip-inno-usb2.c > > >
