Sean,
Oops, sorry about miss your suggest :(
On 07/22/2016 11:03 PM, Sean Paul wrote:
> On Thu, Jul 21, 2016 at 9:00 PM, Yakir Yang <ykk at rock-chips.com> wrote:
>> Sean,
>>
>> Thanks for your fast respond :-)
>>
>> But this patch is not the latest one, I have upgraded this to "v1.1" version
>> to fix the eDP can't be disabled problem:
>> [PATCH v1.1 2/2] drm/bridge: analogix_dp: turn off the panel when eDP
>> need to disable
>> Changes in v1.1: - unprepare the panel at the end of
>> bridge->disable() function
>>
>> In spite of this, I would take your comments with my "v1.1" patch.
>>
>> On 07/21/2016 10:28 PM, Sean Paul wrote:
>>
>> On Thu, Jul 21, 2016 at 9:14 AM, Yakir Yang <ykk at rock-chips.com> wrote:
>>
>> Some panels (like Sharp LQ123P1JX31) need to be turn off when eDP
>> controller stop to send valid video signal, otherwhise panel would
>> go burn in, and keep flicker and flicker.
>>
>> So it's better to turn off the panel when eDP need to disable, and
>> we need to turn on the panel in connector->detect() callback, so
>> that driver would detect panel status rightly.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 18 ++++++++++--------
>> 1 file changed, 10 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> index 32715da..ea059b3 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> @@ -961,6 +961,14 @@ analogix_dp_detect(struct drm_connector *connector,
>> bool force)
>> {
>> struct analogix_dp_device *dp = to_dp(connector);
>>
>> + /*
>> + * Panle would prepare for several times here, but don't worry it
>>
>> s/Panle/Panel/
>>
>>
>> Done
>>
>> + * would only enable the hardware at the first prepare time.
>>
>> Errr, this shouldn't go in detect. How about putting this in
>> bridge_enable instead?
>>
>>
>> Nope, if we put this in bridge_enable, then eDP would never be enabled.
>> Here're the calling flow.
>>
>> --> analogix_dp_probe
>> --> analogix_dp_bind # we still haven't prepared the panel here, that
>> means panel have been powered up
>> --> analogix_dp_detect # Oops, losing panel valid hotplug signal, cause
>> panel have been powered up
>> --> ** Keep detecting **
>
> Yeah, after playing around with the patch yesterday I discovered this
> for myself. I still don't think detect() should be changing hardware
> state. Perhaps you could add a matching unprepare() after you attempt
> to detect the panel?
Hmm, I don't understand the meaning of "add a matching unprepare()".
I didn't see there is an unprepare() callback in drm_crtc_helper.h, would
you like to share some simple code :-D
Thanks,
- Yakir
> Sean
>
>> + */
>> + if (dp->plat_data->panel)
>> + if (drm_panel_prepare(dp->plat_data->panel))
>>
>> Personally, I don't like doing work in a conditional since you're
>> throwing the return code away. Could you break this out into:
>>
>> ret = drm_panel_prepare(dp->plat_data->panel);
>> if (ret)
>> DRM_ERROR("failed to setup the panel ret=%d\n", ret);
>>
>>
>> Okay
>>
>>
>> + DRM_ERROR("failed to setup the panel\n");
>> +
>> if (analogix_dp_detect_hpd(dp))
>> return connector_status_disconnected;
>>
>> @@ -1063,7 +1071,8 @@ static void analogix_dp_bridge_disable(struct
>> drm_bridge *bridge)
>> return;
>>
>> if (dp->plat_data->panel) {
>> - if (drm_panel_disable(dp->plat_data->panel)) {
>> + if (drm_panel_disable(dp->plat_data->panel) ||
>> + drm_panel_unprepare(dp->plat_data->panel)) {
>>
>> Same comment here, please break this out into separate statements for
>> better readability/logging.
>>
>>
>> Okay,
>>
>>
>> Thanks,
>> - Yakir
>>
>>
>> DRM_ERROR("failed to disable the panel\n");
>> return;
>> }
>> @@ -1333,13 +1342,6 @@ int analogix_dp_bind(struct device *dev, struct
>> drm_device *drm_dev,
>>
>> phy_power_on(dp->phy);
>>
>> - if (dp->plat_data->panel) {
>> - if (drm_panel_prepare(dp->plat_data->panel)) {
>> - DRM_ERROR("failed to setup the panel\n");
>> - return -EBUSY;
>> - }
>> - }
>> -
>> analogix_dp_init_dp(dp);
>>
>> ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
>> --
>> 1.9.1
>>
>>
>>
>>
>>
>
>
