On 07/25/2016 07:51 PM, Caesar Wang wrote:
> Hi Guenter,
>
> Thanks for fixing it.
>
> On 2016?07?26? 03:39, Guenter Roeck wrote:
>> If the ADC is read for the first time, the caller gets a timeout error,
>> and the kernel log shows
>>
>> read channel() error: -110
>>
>> The ADC may be enabled on boot, and needs to be explicitly disabled
>> for a read sequence to work (otherwise there is no completion interrupt).
>> Disaple it explicitly in the probe function.
>>
>> Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc")
>> Signed-off-by: Guenter Roeck <linux at roeck-us.net>
>> ---
>> drivers/iio/adc/rockchip_saradc.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
>> index f9ad6c2d6821..6aa3271d86b5 100644
>> --- a/drivers/iio/adc/rockchip_saradc.c
>> +++ b/drivers/iio/adc/rockchip_saradc.c
>> @@ -280,6 +280,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>> goto err_pclk;
>> }
>> + /* Make sure ADC is disabled */
>> + writel_relaxed(0, info->regs + SARADC_CTRL);
>
> I think we should reset the saradc controller.
> Since make sure the reset value is 0 and loader-->kernel may even cause harm, as my experience on tsadc. (drivers/thermal/rockchip_thermal.c)
>
>
> e.g.:
> /**
> * Reset SARADC Controller, reset all saradc registers.
> */
> static void rockchip_saradc_reset_controller(struct reset_control *reset)
> {
> reset_control_assert(reset);
> usleep_range(10, 20);
> reset_control_deassert(reset);
> }
>
> ..probe()
> {
> ...
> rockchip_saradc_reset_controller();
> ...
> }
>
Ok, I'll give it a try.
Guenter
>
> -
> Caesar
>
>> +
>> platform_set_drvdata(pdev, indio_dev);
>> indio_dev->name = dev_name(&pdev->dev);
>
>
