Am Freitag, 15. Januar 2016, 21:49:53 schrieb Caesar Wang: > This patch adds the sdio power sequence for kylin board. > The WLAN attached to a SDIO interface, wifi/bluetooth have > reset and power been needed to enable. > > AFAIK, the simple power sequence provider sets a value for multiple GPIOs. > So the reset and power of WlAN chip can be handled in mmc power sequence. > On the module itself this is one of these, that should can be handled by > reset GPIOs in simple mmc power sequence. > > The Bluetooth host wake is high active from bootup, this patch is also > set pinctrl bias as the default to enable the pull up in soc internal. > > Signed-off-by: Caesar Wang <wxt at rock-chips.com> applied to my dts32 branch for 4.6, after moving the sdio-pwrseq node to its correct alphabetical position. Please try to keep to the sorting :-) Thanks Heiko
