Hello.
On 8/21/2016 10:56 AM, Randy Li wrote:
> The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288
> has a hardware errata that causes everything to get confused when we get
> a remote wakeup. We'll use the reset that's in the CRU to reset the
> port when it's in a bad state.
>
> Note that we add the reset to both dwc2 controllers even though only one
> has the errata in case we find some other use for this reset that's
> unrelated to the current hardware errata. Only the host port gets the
> quirk property, though.
>
> This patch came from Doug Anderson <dianders at chromium.org> originally.
Was it signed off by him? Don't you need to keep his authorship via th
"From:" tag?
> Signed-off-by: Randy Li <ayaka at soulik.info>
> ---
> arch/arm/boot/dts/rk3288.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 48ca4e4..646f49d 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
[...]
> @@ -871,6 +873,9 @@
> clocks = <&cru SCLK_OTGPHY2>;
> clock-names = "phyclk";
> #clock-cells = <0>;
> + resets = <&cru SRST_USBHOST1_PHY>;
> + reset-names = "phy-reset";
> +
Don't need empty line here.
> };
> };
> };
MBR , Sergei
