The timer5 supplies the architected timer and thus as has to run when
the system clocksource and clockevents drivers are registered.
---
Changes in v3:
Signed-off-by: Xing Zheng <zhengxing at rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko at sntech.de>
arch/arm/mach-rockchip/rockchip.c | 44 +++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index b6cf3b4..d483b71 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -29,31 +29,38 @@
#include "core.h"
#include "pm.h"
+#define RK3036_TIMER_PHYS 0x20044000
+
#define RK3288_GRF_SOC_CON0 0x244
#define RK3288_TIMER6_7_PHYS 0xff810000
+static void rockchip_init_arch_timer_supply(resource_size_t phys, int offs)
+{
+ void __iomem *reg_base = ioremap(phys, SZ_16K);
+
+ /*
+ * Most/all uboot versions for Rockchip SoCs don't enable
+ * timer which is needed for the architected timer to work.
+ * So make sure it is running during early boot.
+ */
+ if (reg_base) {
+ writel(0, reg_base + offs + 0x10);
+ writel(0xffffffff, reg_base + offs);
+ writel(0xffffffff, reg_base + offs + 0x04);
+ writel(1, reg_base + offs + 0x10);
+ dsb();
+ iounmap(reg_base);
+ } else {
+ pr_err("rockchip: could not map timer registers\n");
+ }
+}
+
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
- void __iomem *reg_base;
- /*
- * Most/all uboot versions for rk3288 don't enable timer7
- * which is needed for the architected timer to work.
- * So make sure it is running during early boot.
- */
- reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
- if (reg_base) {
- writel(0, reg_base + 0x30);
- writel(0xffffffff, reg_base + 0x20);
- writel(0xffffffff, reg_base + 0x24);
- writel(1, reg_base + 0x30);
- dsb();
- iounmap(reg_base);
- } else {
- pr_err("rockchip: could not map timer7 registers\n");
- }
+ rockchip_init_arch_timer_supply(RK3288_TIMER6_7_PHYS, 0x20);
/*
* Disable auto jtag/sdmmc switching that causes issues
@@ -64,6 +71,8 @@ static void __init rockchip_timer_init(void)
regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
else
pr_err("rockchip: could not get grf syscon\n");
+ } else if (of_machine_is_compatible("rockchip,rk3036")) {
+ rockchip_init_arch_timer_supply(RK3036_TIMER_PHYS, 0xa0);
}
of_clk_init(NULL);
@@ -79,6 +88,7 @@ static void __init rockchip_dt_init(void)
static const char * const rockchip_board_dt_compat[] = {
"rockchip,rk2928",
+ "rockchip,rk3036",
"rockchip,rk3066a",
"rockchip,rk3066b",
"rockchip,rk3188",
--
1.7.9.5
