On Fri, 2015-08-21 at 19:46 +0200, Heiko Stuebner wrote:
> Some clocks need to be enabled to accept rate changes. This patch
> adds a
> new flag CLK_SET_RATE_UNGATE that lets clk_change_rate enable the
> clock
> before trying to change the rate and disable it again afterwards.
> This of course doesn't effect clocks that are already running at that
> point, as their refcount will only temporarily increase.
>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Tested-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Reviewed-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
> ---
> drivers/clk/clk.c | 18 ++++++++++++++++++
> include/linux/clk-provider.h | 1 +
> 2 files changed, 19 insertions(+)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 28cd923..564f11e 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1438,6 +1438,15 @@ static void clk_change_rate(struct clk_core
> *core)
> else if (core->parent)
> best_parent_rate = core->parent->rate;
>
> + if (core->flags & CLK_SET_RATE_UNGATE) {
> + unsigned long flags;
> +
> + clk_core_prepare(core);
> + flags = clk_enable_lock();
> + clk_core_enable(core);
> + clk_enable_unlock(flags);
> + }
> +
> if (core->new_parent && core->new_parent != core->parent) {
> old_parent = __clk_set_parent_before(core, core
> ->new_parent);
> trace_clk_set_parent(core, core->new_parent);
> @@ -1464,6 +1473,15 @@ static void clk_change_rate(struct clk_core
> *core)
>
> core->rate = clk_recalc(core, best_parent_rate);
>
> + if (core->flags & CLK_SET_RATE_UNGATE) {
> + unsigned long flags;
> +
> + flags = clk_enable_lock();
> + clk_core_disable(core);
> + clk_enable_unlock(flags);
> + clk_core_unprepare(core);
> + }
> +
> if (core->notifier_count && old_rate != core->rate)
> __clk_notify(core, POST_RATE_CHANGE, old_rate, core
> ->rate);
>
> diff --git a/include/linux/clk-provider.h b/include/linux/clk
> -provider.h
> index 3ecc07d..21e0025 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -31,6 +31,7 @@
> #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate
> change */
> #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk
> accuracy */
> #define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after
> notifications */
> +#define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to
> set rate */
>
> struct clk;
> struct clk_hw;
--
Sjoerd Simons
Collabora Ltd.
