OK, Thanks Heiko. :-) On 2015?11?24? 08:03, Heiko St?bner wrote: > Hi Xing Zheng, > > Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng: >> Hi, >> We need to support rk3036 soc platform via upstream, there are >> some primary parts for the initial release of minimum system: dts, >> clk-pll, smp, and clock tree for rk3036, and additional, we can use >> these startup and run to init processs. > [...] > > after talking with Mike and agreeing that I'm again taking the regular > clock patches to them, I've applied all of this to appropriate branches. > I did some cosmetics, as explained below. > > >> Xing Zheng (6): >> dt-bindings: add documentation of rk3036 clock controller >> clk: rockchip: add dt-binding header for rk3036 >> clk: rockchip: add new pll-type for rk3036 and similar socs > - wrapped some overly long lines, otherwise this is similar to what > Stephen already took for the rk3066-pll-type. > > >> clk: rockchip: add clock controller for rk3036 >> ARM: dts: rockchip: add core rk3036 dts > - split off the evb into a separate patch > - reordered some nodes (please order by the address (the @xxxxxxxx) > - reordered some properties > - fixed the gic cpu masks > > >> ARM: dts: enable smp for rk3036 > folded into the core dtsi addition > > > Please take a final look at [0] to make sure I didn't mess up anything. > > > Thanks > Heiko > > > [0] > https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/next > https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-armsoc/dts32 > > >
