the subject should be add the node/info for crypto...
? 2015?11?06? 09:17, Zain Wang ??:
> Add Crypto drivers for rk3288 including crypto controller and dma clk.
>
> Signed-off-by: Zain Wang <zain.wang at rock-chips.com>
> ---
>
> Changed in v2:
> - None
>
> Changed in v1:
> - remove the _crypto suffix
> - use "rockchip,rk3288-crypto" instead of "rockchip,rk3288"
>
> arch/arm/boot/dts/rk3288.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 6a79c9c..7b7914e 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -170,6 +170,21 @@
> };
> };
>
> + crypto: cypto-controller at ff8a0000 {
> + compatible = "rockchip,rk3288-crypto";
> + reg = <0xff8a0000 0x4000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_CRYPTO>,
> + <&cru HCLK_CRYPTO>,
> + <&cru SCLK_CRYPTO>,
> + <&cru ACLK_DMAC1>;
> + clock-names = "aclk",
> + "hclk",
> + "sclk",
> + "apb_pclk";
I guess you can do this:
clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> + status = "okay";
> + };
> +
> reserved-memory {
> #address-cells = <1>;
> #size-cells = <1>;
--
Thanks,
Caesar
