Hi Heiko:
On 2015?03?11? 17:50, Heiko Stuebner wrote:
> Hi Philipp,
>
> Am Mittwoch, 11. M?rz 2015, 10:28:29 schrieb Philipp Zabel:
>> Am Dienstag, den 10.03.2015, 22:45 +0100 schrieb Heiko Stuebner:
>>> At least the Rockchip variant of the dw_hdmi can have controllable power
>>> supplies providing 1.0 and 1.8V. Therefore add the possibility for the
>>> generic bridge driver to enable supplies provided by the hw-specific
>>> drivers.
>>>
>>> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
>>> ---
>>> changes since v1:
>>> - follow suggestion from Russell King to keep regulator handling local
>>>
>>> to the rockchip implementation for the time being and only generalize
>>> when a real second implementation needs regulator handling
>>>
>>> .../devicetree/bindings/drm/bridge/dw_hdmi.txt | 5 ++++
>>> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 32
>>> +++++++++++++++++++++- 2 files changed, 36 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
>>> b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt index
>>> a905c14..bb74640 100644
>>> --- a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
>>> +++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
>>> @@ -22,6 +22,11 @@ Optional properties
>>>
>>> - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
>>> - clocks, clock-names: phandle to the HDMI CEC clock, name should be
>>> "cec"
>>>
>>> +Optional supplies:
>>> +rockchip,rk3288-dw-hdmi handles two optional power supplies:
>>> +- avdd1v0-supply: 1.0V power supply
>>> +- avdd1v8-supply: 1.8V power supply
>> Are these the names used in the Rockchip documentation?
>>
>> Since the older implementation on i.MX6 uses 1.1V (HDMI_VP) and 2.5V
>> (HDMI_VPH), I wonder whether each SoC should use their own name or
>> whether there should be common names that don't include the voltage.
>> I don't have the Synopsys HDMI TX docs, but I've seen avddhv and avddlv
>> used of other cores' analog supplies.
> The pins of the soc connected to the regulators are named:
> HDMI_AVDD_1V0
> HDMI_AVDD_1V8
> The datasheet only calls both "DC supply voltage for Analog part of HDMI" and
> never mentions them again.
>
> The databook of the IP block itself seems to really call this VPH and VP as
> phy supplies, but documentation is a bit sparse about them.
yes, The IP block call this VPH and VP, VPH--1.8V, VP 1.0V
> I guess as we already use the databook clock-names I should also switch to the
> databook supply names (avdd1v0 -> vp and avdd1v8 -> vph).
>
>
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
>
>
