Add an hdmi node, and also add hdmi endpoints to vopb and vopl
output port nodes.
Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
Tested-by: Daniel Kurtz <djkurtz at chromium.org>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3288.dtsi | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 1d22238..c7235fa 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -585,6 +585,11 @@
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vopb_out_hdmi: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
};
};
@@ -611,6 +616,11 @@
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
+ vopl_out_hdmi: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vopl>;
+ };
};
};
@@ -623,6 +633,33 @@
status = "disabled";
};
+ hdmi: hdmi at ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ ddc-i2c-bus = <&i2c5>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller at ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.1.1
