On Mon, Dec 21, 2015 at 10:21:14PM +0100, Heiko St?bner wrote: > The io-domain driver is necessary to notify the soc about voltages changes > happening on supplying regulators. Probably the most important user right > now is the mmc tuning code, where the soc needs to get notified when the > voltage is dropped to the 1.8V point. > > As this option is necessary to sucessfully tune UHS cards etc, it should > get built in. > > Signed-off-by: Heiko Stuebner <heiko.stuebner at collabora.com> > --- > When booting a Veyron-Jerry from an sd-card it got stuck, as the tuning > failed due to the missing voltage notification and the mmc completely > fails initialization of the card, if this happens. > With this option enabled, I could again boot from my sd-card. > > This is based on the Looks cut off :) Anyway, applied 1-3. -Olof
